Quote:
Originally Posted by Doc
Oooops .. how come you never came back to this ??...
|
i got side tracked with the mass of electrical gremlins and other distraction!
This tranny shift issue is a weird one, with it being a 64' I can't put a after market shifter in. I believe the issue is the shifter it's self, or the cable is the wrong length.
Everything lines up and underneath, I've had the pan off, and the rosster coomb meets up with the correct dents inside the tranny it's at the shifter end where things don't jive! But whats happening is with the cable all the way back you can't engage L1 it comes up less than 1/4 inch short of the dent, like the cable was too short. but if push the cable all the way forward with out making any adjustments, it won't hit park as the cable now appears to be too long!
I'm going to take another swing at it this week and will try to post a few pictures if I can!