Mopar Forums - View Single Post

ettienne · 06-23-2007, 03:38 PM

I applied some lateral thinking and came up with a solution.
I cut the head off a 7mm bolt, filed away some thread so I had a smooth shaft to fit in my pop riveter, screwed the nuts onto the remaining thread and pop riveted them in.

06-23-2007, 03:38 PM	#2 (permalink)
ettienne Junior Member Join Date: Jun 2007 Posts: 3	I applied some lateral thinking and came up with a solution. I cut the head off a 7mm bolt, filed away some thread so I had a smooth shaft to fit in my pop riveter, screwed the nuts onto the remaining thread and pop riveted them in.