1963/2008 Dodge (Polara) 440/Viper Bee
Now that I have your attention
I've wanted one of these B bodies forever. I found a 42K mile 63 model 440 and got a decent deal. I could do the "normal" bigblock, HEMI, MaxWedge.....ect, but wanted something diff.......a challenge. I decide to go modern tech and only one choice made sense - the Viper. I purchased a 6K mile wrecked 08 and am bringing the cars together. I've already stripped the 63 and the Viper is pared down to what I will integrate. When I get home I will add pics via my Photobucket. Stand by to shake your head...........good or bad LoL |
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
Attachment 11702
Last night I cut off everything just behind the seat mount as well as the A pillar and windshield. Just need to trim a bit from the area just behind the front wheels so as not to have it in my 63 wheels wells. That is where the headers meet the cats and then out to side pipes....not needed. |
|
1 Attachment(s)
The basic concept:
This older pic is from before I realized the hoops (roll bar) would not be included. I have cut the Viper just behind the seats since then and hopefully can retain use of the 63 back seat. This depends on clearance, seat mobility and roll cage location. Attachment 11701 |
Doing a custom K-member and custom 4link added to my 8.75 rear.
I'll integrate as much of the new tech as I can. Ordered a custom 4 row radiator Monday. It will bolt right in, but can more than handle the V10 |
I sold the poly 318 and 727 to guy that will use in a 57 Plymouth.
I sold the Viper IRS to a guy that needed Viper rear bits. I hope to sell off more Viper bits and maybe a few of the 63 parts at the end of the project. |
1 Attachment(s)
And YES.........the Viper runs.
I actually moved it under its own power sans front end. A moto jack and some plywood...............do what we gotta do......... Attachment 11700 |
2 Attachment(s)
One of these two cars is approx. what the final result will look like except I'll prob have a black hood(glass) and front grill.
Attachment 11698 Attachment 11699 |
quite the project, I look forward to seeing this unfold
|
Me too.
Getting to where money may be the thing that slows me down.......which is not uncommon cash ----------------------------- Some earlier pics coming in........... |
1 Attachment(s)
Attachment 11697
Not too bad. Had a couple leaks - one at windshield base and one at rear glass base. Typical due to sediments stuck there. For 52 yrs in Stockton, Ca it's ok. Previous owner did hack floor repair, but I'll cut it all out anyway. |
1 Attachment(s)
|
1 Attachment(s)
Attachment 11695
How to transport a 3 wheeled car across the country and not block everything on the trailer. |
1 Attachment(s)
Attachment 11694
I cut off airbags and did a quick clean up. Even with a busted window and a cat it is good for 2 yrs stored. |
1 Attachment(s)
I can't use the rear section b/c it's too wide. I'd be stuck with 19inch wheels and that wont cut it. Also with my 8.75 I can change ratios in no time.
Attachment 11693 |
1 Attachment(s)
8.4 L - 511 cid..........all aluminum with forged crank. This alone is over $23K from the factory. I got this one with only 6733 miles along with a nice dual clutch 6speed and all the electronics plus a nice set of seats for $16,500 + shipping.
Attachment 11692 |
You have been making some good head way up to this point.... " I got my Eye on you!!".... lol
|
With some ProStock sized tires and 4.56 gears maybe I can do some street wheelies
|
Originally Posted by NCC1968
(Post 129027)
With some ProStock sized tires and 4.56 gears maybe I can do some street wheelies
|
Man.... I keep looking at that "Canary Yellow".... That is a "POPPING" Dam nice looking color for that car !!!!!
BOB LIKE'S....:yikes::) |
I like the yellow.....great color for it, but I'm more inclined to less popping colors. The blue is a good match to my bike.
I can't bolt anything to my rear bumper.....fiberglass :D |
1 Attachment(s)
|
1 Attachment(s)
I spent some time today removing the front suspension from the '63. I'm having a custom piece built........something like this:
Attachment 11690 |
Removing the front gets the torsion bars out of the path of the exhaust. The Viper has side pipes so the header is funky. I may have to get an aftermarket version for the SRT truck.
|
Well this is certainly interesting and WAY above anything I could ever attempt.
|
Originally Posted by DDodger
(Post 129143)
Well this is certainly interesting and WAY above anything I could ever attempt.
Bob like it... Whos building that custom peace???? |
|
All times are GMT -7. The time now is 07:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands