1968 coronet

scampdude · 02-13-2008, 12:23 PM

I might purchase a 1968 coronet the right door is badly crushed in will the doors from a 1968 belvedere , roadrunner gtx fit it???? i have only found fiberglass doors from a company for roadrunner

I have a 69 charger and am putting in a 440/727 from a 76 new yorker will the motor mounts be the same????? the charger was a 318 car,, but was told before the motor mounts are same on sb &bb cars in older models

Will the 318/904 1968 coronet driveshaft fit the 440/727 1969 charger???
are the front tranny driveshaft yoks the same????

ucfierocharger · 02-19-2008, 12:30 AM

I KNOW the yokes are different. I do not think the driveshaft is the same length either. You may want to also check the tranny mount, I believe those are different. I think the motor mounts are the same, but I am not 100% sure. You could always look at the mounts on the BB and see if they are the same.

68rtcharger · 02-20-2008, 04:07 PM

.1 The others from 68 will be the same.... 69 is cosmetically the same with the exception of the door lock possition... the 68 is all the way back on the upper door, and the 69 is a few inches from the rear of the upper
.2 the mounts themselves are different... but if you have the mounts from the implant 440 they will bolt right up to you K frame without any mods
.3 the yoke as well as the length is different. I have both here if you are interested.. the shaft and BB yoke
crittergtr@aol.com

02-13-2008, 12:23 PM	#1 (permalink)
scampdude Junior Member Join Date: Feb 2008 Posts: 11	1968 coronet I might purchase a 1968 coronet the right door is badly crushed in will the doors from a 1968 belvedere , roadrunner gtx fit it???? i have only found fiberglass doors from a company for roadrunner I have a 69 charger and am putting in a 440/727 from a 76 new yorker will the motor mounts be the same????? the charger was a 318 car,, but was told before the motor mounts are same on sb &bb cars in older models Will the 318/904 1968 coronet driveshaft fit the 440/727 1969 charger??? are the front tranny driveshaft yoks the same????

02-19-2008, 12:30 AM	#2 (permalink)
ucfierocharger USB car drive man Join Date: Jun 2007 Location: Cincinnati OH Posts: 139	I KNOW the yokes are different. I do not think the driveshaft is the same length either. You may want to also check the tranny mount, I believe those are different. I think the motor mounts are the same, but I am not 100% sure. You could always look at the mounts on the BB and see if they are the same. __________________ Unique mopar flash drives? http://www.usbcar.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1968 Charger Parts	unit_121	Mopar Classifieds	0	11-30-2007 03:54 PM
1968 NEW YORKER	ONEBADBIRD	C-Body	0	10-10-2007 11:03 AM
1968 Fury bucket seats in a B-body?	uberdodge	B-Body	0	05-15-2007 05:37 PM
1968 charger glass	mmarty	B-Body	0	03-27-2007 03:39 PM
1968 GTX Convertible Hemi Clone	swissmopar	B-Body	6	10-20-2006 09:01 AM

02-20-2008, 04:07 PM	#3 (permalink)
68rtcharger Junior Member Join Date: Feb 2008 Posts: 12	.1 The others from 68 will be the same.... 69 is cosmetically the same with the exception of the door lock possition... the 68 is all the way back on the upper door, and the 69 is a few inches from the rear of the upper .2 the mounts themselves are different... but if you have the mounts from the implant 440 they will bolt right up to you K frame without any mods .3 the yoke as well as the length is different. I have both here if you are interested.. the shaft and BB yoke crittergtr@aol.com