Question regarding a 68 fury II
#31
Mopar Lover
It only takes a phone call.... Mike has many Combo's to choose from.... Great guy to talk to when your close to buying something... If nothing else just call him and see what he might be Blowing out on sale at that time... Tell him I referred you... Really!! ...
#32
Mopar Fan
Thread Starter
Also I'm curious, I've heard that the transmission on my fury (the 727 torqueflight 3speed auto) can only handle small blocks, could it handle a 340? It currently has a 318 but if I were to upgrade I'd love the 340.
#33
Mopar Lover
Yes... Just an FYI... The Small Block and the Big Blocks on Chrysler Products use different Bell Housings for there engines...
Small Block Housing for Small Blocks
Big Block Housing For Big Blocks
If you wind up needing a transmission? CRT is My Choice... http://coperacingtrans.com/
Small Block Housing for Small Blocks
Big Block Housing For Big Blocks
If you wind up needing a transmission? CRT is My Choice... http://coperacingtrans.com/
#34
Mopar Fan
Thread Starter
We are currently exploring options to get the oil slinger nice and snug, so far no progress has been made because I've been working 12 hour shifts.
I wanted to check with you guys, would putting washers next to the slinger to make it fit be a bad idea? I'm not really sure how the engine would tolerate that.
I wanted to check with you guys, would putting washers next to the slinger to make it fit be a bad idea? I'm not really sure how the engine would tolerate that.
#37
Mopar Fan
Thread Starter
Hey guys, been away for a little while. I guess what happened is when I ordered a new timing chain they sent me a double roller instead of a single. It still fits and runs but prevents the oil slinger from seating correctly.
I read on mopar chat that double rollers dont need oil slingers but that was for 440s. Not 318s.
Thoughts? Should I leave it alone? Take off the oil slinger? Replace the timing chain?
I read on mopar chat that double rollers dont need oil slingers but that was for 440s. Not 318s.
Thoughts? Should I leave it alone? Take off the oil slinger? Replace the timing chain?
#38
Mopar Lover
This Small Block has a double Roller and a Slinger??????
https://www.google.com/search?q=Mopa...D2%3B640%3B480
https://www.google.com/search?q=Mopa...D2%3B640%3B480
#39
Mopar Fan
Thread Starter
This Small Block has a double Roller and a Slinger??????
https://www.google.com/search?q=Mopa...D2%3B640%3B480
https://www.google.com/search?q=Mopa...D2%3B640%3B480
Are there any modifications I should make to make it sit right? On another forum someone mentioned something about drilling a new hole in the block or something.
Thread
Thread Starter
Forum
Replies
Last Post