1952 New Yorker Information
 

Hello Everyone.

Looking for sources for parts. Canada/US

Need a shop manual for this car.

Need to decode the vehicle option plate or tag.

Need good source of interior materials.


Cant wait to start this project and i have an 11 month deadline.

My GF Sylvia and I want to drive to our wedding in Aug 2014 with our car.

Thanks in advance !! : hail :

http://www.hemmings.com/

Is one good source....:hello:

here is a joke. all you need is cubic money and cubic time.

Ordered a bunch of parts from rockauto.com

Now i just need a good source for a carburator kit ....anyone !

Also bought a bunch of service manuals from a fellow hobbyist from Vermont ...cant wait to get those.

:)

http://carbkitsource.com/

Got the engine started yesterday, after installing a new coil and some ignition wires.
Today i toredown the carburator as it was full of varnish ..success cause cause i didnt tear one gasket.

Power steering is still functional ...just waiting on the condensors to rebuild the distributor.

I have to replace the water pump as the bearing or bushing is bad ....very loud.

Should have my manuals tomorrow.

And found on youtube a Chrysler Master Technician videos (slideshow) on the repair and diagnostics for the transmission ...great find !!

Today Sunday ... i cleaned out the transmission fluid pan ...it had clumps of parafin in it.

Disassembled the front pump ....the inner ring was toast ...lucky me a got a spare transmission , re-assembled the front pump section. Cleaned out the torque converter.

Verified the transmission, good gears look fine and everything is working, disassembled governor and all switches ...all good.

Tomorrow i will be receiving a bunch of parts from RockAuto and will also receive a bunch of manuals. Tomorrow will be reading night for me.

Project is going great ...GF thinks i should call the car Mistress ...Loll !

I call mine lots of names when I'm mad at it......lol:laugh:

Hello,
I also have a New Yorker but it is a 1953. It's the same car as the 1952 Chrysler Saratoga, and in 1953 the New Yorker became the New Yorker Deluxe. I'm looking for a mopar heater core if anyone can help? My core started leaking to the tune of 2 gallons lost. Today I had the heater bypassed until I find a core. Some guy will rebuild mine, but 400 dollars seems to high. Thanks

**** News on project ****
 

Wow ...what a busy year it has been.(work related)

Searched and searched ....for a local rebuild shop that would do my WP .... found none ....finally found a NOS seal kit and got some bearings local ....repaired the pump ....with high expectations ....shaft is pitted and doesnt seal .....getting a rebuilt one from the US.

And know i am attacking the brakes ....need to find some shoe toe adjuster's for all 4 wheels and the cylinder rods for the front brakes. (new cylinders but no rods) i have redone my master ...but i may have to get it sleeved.
Cant test the Booster yet.

kanter cant supply these parts ...could anyone help me find some ?

Happy Halloween

Try Atlas Chrysler.... http://www.moparmall.com/servlet/StoreFront

Not sure if you have this list of folks to help... http://www.vintagepartsource.com/chryslerparts.htm

As for the water pump shaft "Sleeving" and or welding and re-machining was not that uncommon.

All Star Automotive might also be able to help?????
http://www.yellowpages.com/baldwin-p...72?lid=8548472
Ask For Robert....

:)

Got my brakes in from kanter ....found 2 cylinder push pins.

Them darn shoes are tight ....barely able to re-assemble the front wheel.

How can i get a stuck drum off the rear.

I tried heating the hub, a very large slide puller and even a zip gun ...it seems as if someone pushed the keyway in the hub/shaft way to deep and its frozen there.

Also got a WP from kanter ....bur havent installed it yet.

My new Garage is built and the electrician is coming saturday to finish the wiring. Will post a few picks later ...neighbors are jealous :drool:

PS Thanks for the info RacerHog

The one I have is like this one.....

http://www.plymouthbulletin.com/rearbrakes.htm

Thks RacerHog for the plymouth link ....my puller is about the same size but it is of the slide/hammer type. I use it mainly on more recent FWD cars when replacing wheel bearings.

I will try to get my hand one one ( we have a few at the shop) but i was reluctant of putting one on. Scared of damaging the axle threads.

I have done the same with a slid hammers on the newer stuff... :)
But some of this old stuff has some good (Hair on it)....lol You needs something with a little more balls... ;)

the three leg puller my dad has used since the early 50 is still on the wall where my dad put it, before he died in 1987. and an old tapered axle near by on the floor. damn iam glad we dont still have the tapered axle and ball & trunnuion U-Joints. GLAD, GLAD, GLAD.

If you're puller is ever tired of being on that wall and would like to be adopted by a good caring mechanic ..and included in my new garage I would welcome it gladly ....i am sure its willing to do a few more pulls.

Frank

to BB i am sure ill never use it again. and i have LOTS of other stuff. since you ask for it first i will have to think if you have first shot , or give my buds in the local club first shot. and i dont really own them much. but i dont a list of all that i have. off the top of my head i have about 10 factory service manuals. about the same amount of motors brand manuals. but not a lot of parts. do have some tools.

And I thought we were friends ?

:argue:

well it cost to much to ship it Cal. LOL LOL i had no idea it was worth much. its hung on the wall since dad put it there in 1985. maybe you guys could have joint custody. 6 mo / 6mo. LOL LOL ill bet these young kids dont even know what it is. wow i dont even know the right name for it.

Give it to Frank.... I dont even want it anymore.....
Hope it falls off the wall and hit Moe in the foot!!!lol

OK i knew you were my friend. i wont hold it against you.

Your rite Moe...... https://www.freesmileys.org/smileys/...atdrink014.gif

well i dont know what to do. right now i have to work on taking care of mom. and help my GF move a lot of her stuff. and i have a lot of stuff to get rid of. i have two storage units to empty. my trouble is i should get rid of stuff but i find it hard to do it. i have a lot of memreys in all that stuff. i look at something and say, i remember when dad and i so on and so on.

It is hard to let go...... But Just remember you can take it with you.... Only the Memories stay.... The rest is just stuff.... Don't let it berdin you..Yard sale it to a good home.:)

moe7404 I feel your dilemma ....my father passed away a few years ago and he was a Tool & Die machinist in Detroit ...i kept a few of his hand tools and gave some to one of my sisters ....we co-own a Fargo pick-up and when we use one of my Dads tools we always strike up a discussion concerning him ...keeps his memory more vivid ...sort of a therapy thing.

If you do want to part with some tools or manuals ...I have a good place for them. Personal message me and we could discuss ...Thanks for your offer