aluminum slot rims

shadowwolf30 · 06-02-2007, 09:26 AM

i have recently purchas a set of 14" aluminum slot rims.
upon realizing that they would not fit anything i own because of their bolt pattern.
i was told that they were a rare bolt pattern that would only fit plymouth barracuda and only 2 years of barracuda. the pattern seems to measure 5 lugs on a 4" circle.my intention was to have them machined into unilug. but if they are what they have been deemed to be i would rather not destroy them that way.....i need help to verify that they are truely what they are and being in excellent condition what they may be worth. thanks. please respond to email if at all posible. shadowwolf_30@yahoo.com

4004speedrunner · 10-31-2007, 12:55 PM

Another company, American Dragmaster, produced a unique version of the aluminum slot wheel, using a rounded, bowl-shaped face with six slots. As far as I know, this is the only style of wheel they ever made other than a Torq-Thrust copy. I've seen several sets of 14 by 7-inch American Dragmaster six-slot wheels, but only two pair of their 15 by 7 and 15 by 10-inch wheels. The outside face on these wheels looks okay, but they are the only cast wheels I know of that were rough-cast and not machined around the rim.

it aint email but its all I can do from what I saw this is the only company that made your size and if so I wouldn't do it my dad has a pair on his 74 pinto stationwagon that are 14x7 but are small bolt pattern plus there 4bolt to really hard to find hres elling if anyones interested

06-02-2007, 09:26 AM	#1 (permalink)
shadowwolf30 Junior Member Join Date: Jun 2007 Posts: 1	aluminum slot rims i have recently purchas a set of 14" aluminum slot rims. upon realizing that they would not fit anything i own because of their bolt pattern. i was told that they were a rare bolt pattern that would only fit plymouth barracuda and only 2 years of barracuda. the pattern seems to measure 5 lugs on a 4" circle.my intention was to have them machined into unilug. but if they are what they have been deemed to be i would rather not destroy them that way.....i need help to verify that they are truely what they are and being in excellent condition what they may be worth. thanks. please respond to email if at all posible. shadowwolf_30@yahoo.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
axle code	plowman	B-Body	0	04-28-2007 10:39 AM

10-31-2007, 12:55 PM	#2 (permalink)
4004speedrunner deranged but fun Join Date: Sep 2007 Location: greeneville Posts: 48	Another company, American Dragmaster, produced a unique version of the aluminum slot wheel, using a rounded, bowl-shaped face with six slots. As far as I know, this is the only style of wheel they ever made other than a Torq-Thrust copy. I've seen several sets of 14 by 7-inch American Dragmaster six-slot wheels, but only two pair of their 15 by 7 and 15 by 10-inch wheels. The outside face on these wheels looks okay, but they are the only cast wheels I know of that were rough-cast and not machined around the rim. it aint email but its all I can do from what I saw this is the only company that made your size and if so I wouldn't do it my dad has a pair on his 74 pinto stationwagon that are 14x7 but are small bolt pattern plus there 4bolt to really hard to find hres elling if anyones interested