98 Viper Brake Master Cylinder Question

buttslapper · 09-25-2007, 11:36 AM

I am taking the engine and tranny of a 98 viper and swaping them into another car. I have a few questions regarding the clutch master cylinder? To get the setup right in my new vehicle, I need to know the stock bore and stoke of the clutch master cylinder. Can anyone help me out? I beileve the bore is 3/4" and the stroke is 1". Please confirm.

John

ucfierocharger · 09-25-2007, 12:52 PM

Have you asked the dealership? I really dont know, but im sure it says in the service manual if you can get your hands on one.

buttslapper · 10-01-2007, 06:32 AM

I checked the manual, it didn't have any of those specs. Can someone measure the stroke of the master cylinder and maybe guess on the diameter.
Thanks

09-25-2007, 11:36 AM	#1 (permalink)
buttslapper Junior Member Join Date: Sep 2007 Posts: 2	98 Viper Brake Master Cylinder Question I am taking the engine and tranny of a 98 viper and swaping them into another car. I have a few questions regarding the clutch master cylinder? To get the setup right in my new vehicle, I need to know the stock bore and stoke of the clutch master cylinder. Can anyone help me out? I beileve the bore is 3/4" and the stroke is 1". Please confirm. John

09-25-2007, 12:52 PM	#2 (permalink)
ucfierocharger USB car drive man Join Date: Jun 2007 Location: Cincinnati OH Posts: 139	Have you asked the dealership? I really dont know, but im sure it says in the service manual if you can get your hands on one. __________________ Unique mopar flash drives? http://www.usbcar.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1970 Coronet brake questions	oldrustycars	B-Body	8	11-09-2007 07:39 PM
Disc Brake Conversion Kits	BTKBraden	B-Body	5	02-22-2007 11:31 AM

10-01-2007, 06:32 AM	#3 (permalink)
buttslapper Junior Member Join Date: Sep 2007 Posts: 2	I checked the manual, it didn't have any of those specs. Can someone measure the stroke of the master cylinder and maybe guess on the diameter. Thanks