Mopar Forums

Mopar Forums (/forums/)
-   Engines, Exhaust and Fuel systems (https://moparforums.com/forums/f81/)
-   -   408 Stroker Twin turbo? NEED ALL THE HELP I CAN GET (https://moparforums.com/forums/f81/408-stroker-twin-turbo-need-all-help-i-can-get-14730/)

Seanzie1405 04-21-2013 05:53 AM

408 Stroker Twin turbo? NEED ALL THE HELP I CAN GET
 
Okay guys I need some serious help with right now im in the middle of an engine swap from the v6 in my Dakota too a 360 magnum v8 but I found alot of video of guys who run there 360 magnums with twin turbos and make huge power like this one
This dyno was 574 RWHP @ 5650 @ 10lbs boost.....The engine hp is around 717 with a 20% drivetrain loss.

But is it possible too take 408 stroker and twin turbo it and it still be fairly reliable? keep in mind this is going too be in a 408 stroked magnum block

PURPLE HORONET 04-21-2013 08:49 AM

1 Attachment(s)
If its built correct the engine will be very reliable,, Hudge power has been in boats for a long time.. Here is a pic of my buddies boat.. Twin turbo 572 tall dec,, 28 pounds of boost on 113 gas,, 1800hp, He uses this boat every weekend in the summer.

Coronet 500 04-21-2013 09:43 AM

If your serious about this I'd have a look around here:



http://www.theturboforums.com/forums...bo-Tech-Forum?

Seanzie1405 04-21-2013 10:33 AM


Originally Posted by PURPLE HORONET (Post 101823)
If its built correct the engine will be very reliable,, Hudge power has been in boats for a long time.. Here is a pic of my buddies boat.. Twin turbo 572 tall dec,, 28 pounds of boost on 113 gas,, 1800hp, He uses this boat every weekend in the summer.

My only really big concern is ive heard 408 stroker kits really push the limits of a 360 magnum block let alone running my turbo? and finding headers for it is kinda a bitch for them but for your buddy running 28 pounds of boost on his? what is the compression ratio on his im gussing around 8 5 1? I know these 360 magnums aren't very high revving so that's why ive been thing by the time my torque is peaked at 3 grand my turbos should do me good lol even though a 360 magnum is a small block I always have considered them more like a big block because they are a really torque drive motor and not very high revving like a typical small block

mod381 04-21-2013 01:42 PM

Here you go but it is long with a lot of info.

http://www.forabodiesonly.com/mopar/...d.php?t=116512

Seanzie1405 04-21-2013 09:50 PM


Originally Posted by mod381 (Post 101832)
Here you go but it is long with a lot of info.

http://www.forabodiesonly.com/mopar/...d.php?t=116512

THANK YOU! that was seriously helpful im not gonna be going too the extremes he did but I think 500 wheel horsepower is doable for a fun street strip combo :dance:
keep in mind this is going into a 3rd gen Dakota so im gonna be tight on room and traction is gonna be a bitch but it sure will be fun too spank some imports and ford lovers besides IMO I think its more fun too build a fast truck and be a sleeper then when you floor it in a truck and going flying buy the looks on there faces is just priceless!


All times are GMT -7. The time now is 11:51 AM.


© 2024 MH Sub I, LLC dba Internet Brands