expert HELP needed
#1
Mopar Fan
Thread Starter
Join Date: Feb 2017
Location: St Petersburg Fl
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
expert HELP needed
identified a slight dilemma with my 72 Challenger Rallye, just noticed or actually was noticed by a fellow Mopar guy that my dash has an 8k tach and supposedly should be 7k my dilemma is the clock adjuster goes through the lens as it should in 72 and the trip reset adjuster through lens as it should. do I need graveyard cars or do we have an awesome Mopar guy here
Thank you in advance
Thank you in advance
#6
Super Moderator
Me wouldn't think that hard......
But that's me.
It could be a replacement or reproduced part, mopar wasn't the best about the exact gauge when you ordered a new replacement, or it maybe correct for the car.
But that's me.
It could be a replacement or reproduced part, mopar wasn't the best about the exact gauge when you ordered a new replacement, or it maybe correct for the car.
Last edited by Iowan; 02-20-2017 at 05:39 AM.
#7
Mopar Lover
Use a sharpie and black out the 8. Problem solved! This could have been a replacement or it was what was supplied to the line when the car was built. They installed it and figured 25 years later it would not be a real dilemma.
#8
i like the sharpie idea.i wish i had his problem if it tacks it tracks
Thread
Thread Starter
Forum
Replies
Last Post
Rumblefish318
General Discussion
9
06-26-2013 05:24 PM