Lots of Parts for Sale!
 

Hello all! I'm new to the site! My grandfather has been collecting Mopar parts for 40+ years and he has decided to start selling some of it off! I'm not sure of everything he's got but he knows everything!so if there's anything specific you are looking for please let me know. I know he doesn't have many body parts just the motor and chassis stuff.. You can reach me on here, my email:taylorevans18@gmail.com, or calling/texting 407-371-7893

Thank you for your time!
I have a Paypal account for shipments or willing to meet up in person for anyone in central Florida!

Attachment 13733

Attachment 13734

Attachment 13735

Attachment 13736

Attachment 13737

Have just about everything from blocks, cranks, pistons, heads, drive shafts, pullies, carbs... The list goes on!

Any front fenders for a 1968 chrysler newport custom 2 door hardtop?

Does on of the driveshafts by chance have a ball and trunnion style "Detroit" u-joint? (example in pic below)
https://encrypted-tbn2.gstatic.com/i...rySRxCoptQJC6Q

and i thought I had a lot of carbs. LOTS of time on the good old AFB

holy sh$#
 

DO YOU HAVE A/C LINES FOR 66 POLARA

Looking for an original set of Valve covers for a 340 magnum, 73 vintage.

Dave.

I am looking for a Carter 4682S Carb. It goes on a 1969 383 Mopar.

Thanks.

Mike

Where are you located? Cost of shipping must be factored in.
Thanks

1970 Newport Parts.
 

Looking for parts for a '70 Newport. Also looking for parts to repair front-end sub frame - any cars that were parted out still around?

I could use a complete 400 With a 727 trans

Hello Looking for a 331 hemi water pump ....urgent.

reply to trudeauracing@live.ca

Looking for a 18 spline 4 speed. Please pm me. Thanks

hi
looking for trunk deck lid molding upper and lower
in great shape need photo
also automatic console
and other stuff
please contact me and I'll give you a list
thanks

need parts
 

ok what I have is a 1968 barracuda notchback
here is a list of stuff I need I guess you could go through it
ok as follows most important first!
1) trunk deck lid moldings ( must be in great shape) need upper and lower
2) tail light housing 2 of them lens red with the white reverse light 2 of them I would prefer repos
3) console for automatic trans console I want is the one with the top plate metal with the black stripe coming down the middle must be in mint condition ( no wood grain)
if you don't have ., I could use the bottom part of the console no cracks , no tears etc... I'm not worried about the paint I could do that my self.
3) dash with glove box also must be in great condition
with cut outs for the thumbwheel radio (! no wood grain !)
4) thumbwheel radio am and fm in working condition wheels and chrome must be nice no pits etc....
5) some light fixture great shape with dome
6) hood signal lights 2 of them
7) wheel well chrome molding need one don't know which one yet
8) hood inserts must be mint left and right

all products I must without a doubt have real good photos
I only due pay pal for your protection and mine

I'm a real person if I say I want it you bet your ass I'm buying it
no games
I live in New York 12771

Need gas gauge and oil pressure gauge .

if this thread is still open I need a gas cap for 1972 Challenger

Here you go..... :)
http://www.classicindustries.com/pro...ts/me1757.html

Is anyone sure they fit?

Hello, I'm looking for a small block K frame for a 1971 Demon.

Looking for a 742 carrier 3:55 sure grip

1968 roadrunner
 

hello,where are you located?Need bell housing 383 4spd roadrunner ,drive shaft ,etc thanks Gregg I'm in Ct 203 592-9744 text anytime or gideg4@yahoo.com

Driveshaft
 

Your Grandfather will know what I am speaking of. In 1958-59-60 Plymouth made a cast iron 4 barrel and a dual quad janifold for the Fury 318 engines. The manifolds had a small square bolt pattern for the Carter WCFB carburetor. I am in need of the single 4 barrel manifold. Possibly there might be one way back in a coroner.

dumus43@att.net

Control Lever for reverse light switch.
 

Hello MoparMan,

I am looking for a control lever that attaches to the steering column shaft that controls the reverse light switch and the reverse light switch as well. The parts are for a 66 Dodge Coronet 440. I have attached a pictures of the control lever, which is cracked, the light switch and the steer column. Let me know if you find anything. I appreciate it.

https://cimg0.ibsrv.net/gimg/moparfo...ca349a7644.jpg
Control Lever
https://cimg5.ibsrv.net/gimg/moparfo...5d142a6a46.jpg
Lever attaches to the steering column
https://cimg9.ibsrv.net/gimg/moparfo...7d1453fd70.jpg
Reverse light switch
https://cimg7.ibsrv.net/gimg/moparfo...e9f0929a29.jpg
Reverse light switch
https://cimg3.ibsrv.net/gimg/moparfo...e4dde45e20.jpg
Reverse light switch

Do you have anything for a 1957 D100 Dodge Truck?