axle tube paint marking
#1
New Member
Thread Starter
Join Date: Aug 2018
Location: in my rig
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
axle tube paint marking
im convinced it's an original marking, but so far have been unable ti decipher
its on an 8 3/4 rear, with 1 3/4 pinion sizing...
there are 2 fat yellow stripes painted on side of
pinion housing - opposite of cast numbers
& the same paint has been used to stencil "295" on the outside of axle tube.
Any knowledge about this floating around ?
its on an 8 3/4 rear, with 1 3/4 pinion sizing...
there are 2 fat yellow stripes painted on side of
pinion housing - opposite of cast numbers
& the same paint has been used to stencil "295" on the outside of axle tube.
Any knowledge about this floating around ?
#2
New Member
Thread Starter
Join Date: Aug 2018
Location: in my rig
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
mystery solved
the 2 stripes were made by assembly line inspector
& the "295" are the last 3 digits of the part number for the axle housing assembly.
credit Brad, themopardude
& the "295" are the last 3 digits of the part number for the axle housing assembly.
credit Brad, themopardude
Thread
Thread Starter
Forum
Replies
Last Post