44/60 hybrid rear axle - Manchester, NH
 

I've got a 1986 Grand Wagoneer N/T rear D44 (LP) with Ford D60 outers and SRW hubs with new bearings (spindles can be bored to fit 35 spline shafts). New Blue Torch Fab truss (1/2" thick) with tie in 5/16" thick diff cover. Added gussets to spindles for added support and ran 1/8" from truss to end of axle (should have been boxed in, I know). Wheel mount to wheel mount measurement - 61 3/4". No gears, carrier or shafts. It is primed and painted black.
Asking $250 picked up in Manchester, NH. I can strap it to a pallet and get a shipping quote if interested or buyer can setup their own (have a shipping dock at work).
Cut and grinded 45*
Attachment 15998
Attachment 15999
setup spindles
Attachment 16000
spindle welds
Attachment 16001
Attachment 16002
truss welds
Attachment 16003
Attachment 16004
Attachment 16005
spindle gussets - they have been cut down flush with the top of the spindle
Attachment 16006
finished
Attachment 16007