This is not all I have, but all I can remember at the moment. Let me know if you are interested and we can see if we can work something out. I will also be advertising on Craigslist and/or ebay.

1 pair of seats that were in my car, but I do not think they are correct for the 67 GTX.
SOLD 1 power steering pump complete with hoses and brackets
SOLD 1 pair front bumper brackets.
SOLD 1 pair rear bumper brackets.

Feel free to call Bart at 503-364-2622

I can take pictures of any of these on request

 

i'm interested in the power steering pump and assembly. any pics and how much?

 

The reason I have an extra of these is because I thought I lost it. I called a wrecking yard and they told me $135 for a pump, pulley and brackets and they would only say the pump would be good for a core. I decided to buy all new because the car is so noce and it was $135 for a core, so I spent about $400 for all new. Then I found my pump I would ask $150 because I know the pump is good and it comes with pulley brackets and hoses. I have cleaned and painted it as well. The pump is at a buddy's house where I am finishing up the car. I will be there Saturday and take pics and bring it home with me.

 

can you post pics of the snorkel, shifter, and seat backs?

 

Here you go. I really wanted the air cleaner, but now that the engine is in the car, I can see that it won't fit. The intake I have is too tall.

 

as soon as i see the pics for the power steering, i'll make a decision. but i'll problebly take it

 

Thanks Vorstang. I will get pics Saturday and post them Saturday night or Sunday morning.

 

ok thanks

 

do you have any idea for what you want for these?

 

I was thinking $50 each for the shifter and pair of seat backs and the air cleaner would be $450. Not trying to make any money on the air cleaner, that is a bit less than I paid for it after looking for months to find one. Buyer pays shipping.

 

Ok Vorstang, here are the power steering pump pics.

 

it should fit my 1966 satellite with a 383 right?
also how much shipped to Amsterdam NY. 12010?

 

I would think it would fit your application, but maybe post a thread and get confirmation. I think I can pack it in a postal flat rate box for $10.95. Double check the fit and let me know. I will hold it for you until you make a decision.

 

does the pump leak or need to be rebuilt?

 

Not that I am aware of. My car was converted to power steering just a few months before it was torn down for restoration. That was 4 years ago, so the pump did not get used much before it was removed. I am not looking to screw anyone over, so if you want the pump, go ahead and get it. If you are not happy with it, just send it back and I will give your money back.

 

i have a good friend of mine checking to see if it will work on my car. i'll let you know as soon as i find out. thanks

 

No worries, just let me know if you want it or not as soon as possible.

 

GTX,

Can you post pics of the tail panel, the tail lights and the wheel caps for me? What are you wanting for these items?

There's a few other pieces I need (want) for my car, like the plastic pieces that connect under the dash to the heater hoses...they look like a vaccum attachment and come in R and L parts. I need both.

Also need a support bracket, but I'll need to take a pic for you, since I am at a loss to describe it. Also I could use a drivers fender, or I could have mine fixed. The damaged bracket is in that area too, kind of behind the bumper, if I recall (but I've got a new bumper already).

Thanks!

 

Hey Morrigan, haven't seen you on the site for a bit. Sorry, but the hubcaps and tail light bezels are gone. I did take pics of the tail panel and a driver fender I have. Too many to post here, I had to kind of take half pics to get better close ups, plus it is raining and I could not get far enough back from my shed to get full pics. The fender is pretty good, is has one small wrinkle back towards where it meets the door. There is a little surface rust, but no rot. I will post these to my album so you can have a look. I was thinking $25 for the tail panel and $50 for the fender? Give me a shout and let me know what you think.

 

Hey GTX,

I've been running around, keeping busy. Sulking at my car. That kind of fun thing.

Let me take a good look at my fender and tailpanel and compare them to yours. I think your fender is better. I'll most likely take both from you.

I still have to get a good pic of the support or brace that I need.

I'll be in the PDX area on the 20th, but I was bringing down my rice-burner daily driver. Yes, I'm a heretic...but hey, my Durango got wrecked (not my fault and her insurance is paying for everything). Have friends coming north from oakland on the 19th or the 20th to PDX, but I dont know at what time, or if they will have room. I'm working that issue now.

What other parts you have that I might need? And thanks for taking the pics for me yesterday in the rain. It's been pouring here for a couple days too.

 

I hope all is well with you. I am getting damn tired of the rain, that is for sure. I am going to work on my car Sunday, so I will have a better lis then. I know I have:

a 440 pie tin for the air cleaner
left fender
right fender
trunk lid
tail panel
a new set of repop exterior door handles
front and rear bumper brackets
front and rear bumpers (good for core)
I have a 67 GTX grille that has been painted black by someone and it had the red, white and blue emblem.
I have the Belvedere II tail panel
I have the piece the goes below the grille, can't remember what it is called.
I have some more small stuff in the trunk that I can bring home this weekend.
I live just one mile east of I-5 at exit 243. If you want anything, have your friends from Oakland stop by and pick it up and you and I can work out the details later.
fell free to call if you want to discuss anything, I will PM you my numbers and email. Glad to see you back!

 

Thanks! Good to be back!

Alright, obviously my shopping spree is going to get bigger.

Haha good things my friends coming up through Oakland owe me money! They should be able to pay you in !

I'll go out side tomorrow (it was HAILING here today) and check my decklid and my grill. I have one new bumper for the car, but can never remember if it is front or rear. Do yours have the rubber bumpers on them or not?

I think we might be talking about that same piece under the grill!! If so, SOLD.

 

No rubber on these bumpers. I get you some more pics of what I have this weekend and email to you.

 

can you post a pic of the tail light bezels

 

Unfortunately, the tail light bezels sold on ebay a couple of days ago. Sorry!

 

Hey, do you still have a front bumper for the 67 GTX? if so, how much?

Thanks

 

Hi do you still have front buckets for sale? can you post a couple pics of them thanks ps nice color choice on your car shipping to Edmonton would prob be a lot.

 

 

I'ts been a long time since you posted, do you still have the filler panel below the grill? picture?
Thanks, Jim