For sale is my street/strip chrysler 318 small block. complete intake to pan. The motor has about 500 miles on it since total rebuild. The motor runs 14.00 quarter miles in a 3600 lb dodge dart with 323 street gears. it's been bored .030 over to a (323) it has the closed chamber heads, edelbrock performer intake, lunati .494/513 (pn 60403LK) camshaft , keith black pistons, compression of about 10:1. motor runs great and is perfect for another street strip project. it sounds great and pulls hard and 60 foots in the 1.9 sec range. Feel free to email with any questions. Avail for pickup in Salem Ohio, or possible meeting within reasonable distace. I'm only selling because i came across a 408 build plan and want to upgrade, the motor runs consistant low 14's and i drive it to the track without fail every weekend, with a set of 4.10 gears it could easily see mid-low 13's pending vehicle weight. I can honestly say it's one of the healthiest 318's i've seen at the track. selling intake to pan, no alt or dist.
Johnnymac2k6@hotmail.com

http://www.cardomain.com/ride/3149406 this is my cardomain page for my car, there are engine pics as well as the car at the track.
will take 2800 obo.
engine is in car, can hear run. email me with questions about any further specs.
thanks for the interest

 

I got several request for some more info about the motor so here goes, the heads on the motor are closed chamber fast burn style or F heads, the heads are cast, but the are port and polished to increase flow and efficiency, these heads used the 1.78in/1.50 valves.
thanks for the interest