Powerwagon Project
6 Attachment(s)
Well...after many delays, the project begins. 1955 Powerwagon body on to the frame of a 1990 Dodge WD250. Hang on wallet!!!
|
Wow.... Interesting project.... I like those old truck body's... Keep us post with all the cool up dates on the build... Going to be awesome !!!!!
:) |
7 Attachment(s)
Mocked up. Frame will be shortened by about four inches. Next step will be to get cracking on the body work.
|
Now thats going to turn out Bitch'in..... :)
|
What do you have for power?
|
I am going with the drive train that was already on the 90 frame, a 360 4 speed.
|
That will work great, I thought you might have an oil burner in it.
|
3 Attachment(s)
Still mocked up. Some cab work done. Lots of measuring happening. Will require some custom work to make everything fit to give it as original a look as possible.
Marty |
Looks like those front springs are kind of mad at the moment?
looks like they are reversed arced? :) |
Originally Posted by RacerHog
(Post 133429)
Looks like those front springs are kind of mad at the moment?
looks like they are reversed arced? :) |
5 Attachment(s)
Work is progressing. Welder in next week to shorten the frame.
|
Nice... Really coming along.... Looking good !!!!
|
3 Attachment(s)
Firewall in. Modifications next to get rad cowl at correct level. Final mockup in the next week or two hopefully. Then the body work can begin.
|
Looks good...... How did the shorting of the rear turn out?
|
Originally Posted by RacerHog
(Post 133744)
Looks good...... How did the shorting of the rear turn out?
|
Well..... Thats a big project... Should come out awesome and worth the wait.... :)
|
4 Attachment(s)
Frame finally shortened. Metal arriving tomorrow so fabricating of running boards can begin. Rad cowel mount modifications about to start. Discussed design for rear bumper which these didn't have, but we think a modern touch with a step type bumper might be a good idea as this is going to be a daily driver and not a garage queen. She'll be asked to work like any other pickup.
Marty |
Coming around Nicely !!!!!
|
7 Attachment(s)
Work progresses. Boys working on aligning clutch and brake pedals. Steering modifications just about ready to start...matter of ordering some parts. Bottom 6 or so inches of cab rear and corners about to be replaced. So much going on at once...sometimes seems like nothing happening...but it is...lol
|
Lot's of progress.... Looking neater every time we see it.... Keep us posted... Really like the build !!!!!!!!!
:clap: |
Your making good progress , going to be a cool driver!
|
5 Attachment(s)
Work on steering column and pedals progresses. Driveshaft back from being shortened. Nice Monte Carlo being finished up.
Marty |
|
3 Attachment(s)
Pedals set. Looking for tilt steering column. Box removed to replace lower cab.
Marty |
Man... That is really coming along... Looking sweet... :)
|
Metal fabrication is my passion, sure miss it.
It's looking good! |
2 Attachment(s)
Bottom of cab replaced. Inching closer to the actual body work.
Marty |
3 Attachment(s)
Work slowed a bit last couple of weeks. Wrong parts arrived, weather got nice and the beer flowed. Lol. Getting back on track. Waiting for seats to arrive so final setting of steering column can take place. Getting closer to actual body work being done. But first, many components like wiper motors and heater being fit as some custom work has to be done there. Once that's done, cab can come back off.
Marty |
Nice... :)
|
We'll forgive the slow process this time just don't let it happen again!:laugh:
Keep it coming!!!! |
All times are GMT -7. The time now is 05:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands