I can rebuild your 1958 to 1974 push button heat/ air switch.
#1
I can rebuild your 1958 to 1974 push button heat/ air switch.
Below is a canned letter that I send to everyone showing my service and what the charges are. So far I have been able to get the switches back in the mail the day after I receive them. If your car is a 62-65 B body and has air be sure to check your temp selector switch located on the right side o the plenum (picture #3). Also be sure to check your piggy back switch that is located on the top of you blower switch(picture #6). I would need you to send me your switch or switches. There is some machine work that I have to do to the switch. I can fix several problems that happen to most of these switches. The cost is 75.00 to completelt rebuild your switch. I can fix AC/Heat or Heat only switches. I have rebuilt switches for people all over the United States. Rick Eburg did an article on my repairs in the March 2006 edition of Mopar Action. Picture #1 is a before and after shot of the vacuum control switch. It will work on any push button mopar switch from 1959 to 1974. Picture #2 is a before and after shot of the push button repair. Picture #3 is a before and after shot of the Temperature selector switch for 62-65 b body air conditioned cars. Picture #4 is a before and after shot of the max cool vacuum switch that piggy backs on the fan switch on the 62-65 B body air cars. Picture #5 is a before and after shot of the sliding wafer boards that go inside the switch. The port and button repair is made out of black or white delrin material. It is super tough. The other two switches are made of alum. They will all outlast the cars they are going in. The wafer boards are made out of a super tough plastic shim stock. The temp selector switch is 50.00 as is the piggy back max cool switch. Just send a money order for the services that you think you need. Add 5.00 shipping to each order.
#1
#2
#3
#4
#5
#6
I can be reached at aepowell3@verizon.net or (903)-893-5674. I thank you very much for this chance to show my product.
P.S. Please send switches only. No metal parts.
Here is a link to some pictures of my 65 Coronet
http://www.PictureTrail.com/gid5749122
Here is the link to the pictures of the switches http://www.picturetrail.com/gid5749114
#1
#2
#3
#4
#5
#6
I can be reached at aepowell3@verizon.net or (903)-893-5674. I thank you very much for this chance to show my product.
P.S. Please send switches only. No metal parts.
Here is a link to some pictures of my 65 Coronet
http://www.PictureTrail.com/gid5749122
Here is the link to the pictures of the switches http://www.picturetrail.com/gid5749114
Last edited by aepowell; 10-30-2013 at 01:45 AM.
The following users liked this post:
pat2sr (05-09-2014)
Thread
Thread Starter
Forum
Replies
Last Post