Camshaft for 499 big block
09-30-2015 | 10:48 AM
#1
Thread Starter
New Member
Joined: Apr 2014
Posts: 7
Likes: 0
From: Finland
Camshaft for 499 big block
Hello!
I need help for choosing cam for my 499 RB stroker.
Car is -70 Challenger with manual trans and 4.10 gears.
Engine:
4.375"bore x 4.15"stroke 440 block = 499cid
Eddy RPM heads, mildly ported
11.5 comp ratio
Modified Torker II intake with dominator (because needs to fit under stock R/T hood)
Hooker 2" headers with 2x3" exhaust
Do you have similar combos? What cam you use? I'd like to go with solid flat tappet or solid roller.
I need help for choosing cam for my 499 RB stroker.
Car is -70 Challenger with manual trans and 4.10 gears.
Engine:
4.375"bore x 4.15"stroke 440 block = 499cid
Eddy RPM heads, mildly ported
11.5 comp ratio
Modified Torker II intake with dominator (because needs to fit under stock R/T hood)
Hooker 2" headers with 2x3" exhaust
Do you have similar combos? What cam you use? I'd like to go with solid flat tappet or solid roller.
Last edited by 440Mag; 10-01-2015 at 12:16 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Air Bubba
Engines, Exhaust and Fuel systems
7
01-17-2013 09:54 AM
