Whats my hp???
#1
Whats my hp???
Hi all just about to finish my rebuild and was wondering of any of you experts would have a rough idea of the kind if horse power I should be producing..
Reconditioned J heads 2.02 and 1.6 valves
high rise manifold
650 edelbrock carb
extractors
0.060 over size flat top pistons that sit .100 higher for better compression
stage 3 cam 214 and 224 @ 0.050 and .444 .467 lift
Completely stripped and milled where possible
crank been ground and balanced
I'm thinking around 300 ISH???
Reconditioned J heads 2.02 and 1.6 valves
high rise manifold
650 edelbrock carb
extractors
0.060 over size flat top pistons that sit .100 higher for better compression
stage 3 cam 214 and 224 @ 0.050 and .444 .467 lift
Completely stripped and milled where possible
crank been ground and balanced
I'm thinking around 300 ISH???
Last edited by Morpork; 11-20-2017 at 08:59 PM. Reason: Wrong spelling
#2
Super Moderator
318, 340 or 360?
#4
Super Moderator
Small cam, I'd like to see .500 lift with that duration but it should be 300 ish and good torque.