B200 Lower Control Arm
#1
Mopar Fan
Thread Starter
B200 Lower Control Arm
Hi all. I took out all the right side suspension this evening, I'm rebuilding the suspension as all the bushing is shot - same as the steering.
I got everything off except the lower control arm, do any of you know what size socket/wrench size I need for the main holding bolt?
Everything is pretty much metric in the UK . . . I just don't have anything near it! I suspect it'll be a 25 or 26mm - our sets go to 24 then 27mm!
As always, thanks in advance.
Timbo.
I got everything off except the lower control arm, do any of you know what size socket/wrench size I need for the main holding bolt?
Everything is pretty much metric in the UK . . . I just don't have anything near it! I suspect it'll be a 25 or 26mm - our sets go to 24 then 27mm!
As always, thanks in advance.
Timbo.
Thread
Thread Starter
Forum
Replies
Last Post
Inspector71
Chassis, Suspension, and Brakes
2
10-15-2013 01:26 PM