No spark 72 Fury III
 

Hi there! My guy had a 72 Fury III he had to sell (was a daily driver when we sold it) this year I bought it back. The people who had it, messed with it. The car had some trouble starting when we went to pick it, my guy discovered lose connection to the coil. He tightened it up and the car started. Now we've had it a week and it started once, but since then no spark. New coil, new Ignition Module, looks like a new solenoid recently (not by us) replaced plugs, cleaned up wires from corrosion, checked connection on ballast, checked fuel lines and it still not starting. We just tested for spark...nothing. Engine cranks but wont kick over.
what are we missing?

Make sure you have an excellent ground to the ignition module. I have even run astand alone ground straps to the ignition module.

With all that has been done ? I would check into the distributor pickup inside the distributor. Look for melted wax under it...Buy a good quality one if it is bad. I had a 79 Van 360 and that is the only part of the ign I ever had to replace...

This. I found out the hard way.