Part(s) Wanted Post up what part(s) you are looking for here.

Need a 4bbl intake with carb for 69 dodge 273

Thread Tools
 
Search this Thread
 
Old 10-24-2012 | 04:53 PM
  #1  
jimiheadstone's Avatar
Thread Starter
Mopar Fan
 
Joined: Aug 2011
Posts: 91
Likes: 3
Need a 4bbl intake with carb for 69 dodge 273

looking for a 4bbl intake with carb for a 69 dodge 273 motor.
Would prefer stock intake but aftermarket is ok provided that it will fit the 273.

Email me Donmac34@aol.com
Old 10-24-2012 | 05:28 PM
  #2  
TVLynn's Avatar
Mopar Lover
 
Joined: Apr 2011
Posts: 4,282
Likes: 387
Edelbrock street master ?? SP2P manifold ??
Old 10-25-2012 | 02:25 PM
  #3  
jimiheadstone's Avatar
Thread Starter
Mopar Fan
 
Joined: Aug 2011
Posts: 91
Likes: 3
is it for sale? or are you recommending it?
Old 10-25-2012 | 04:33 PM
  #4  
TVLynn's Avatar
Mopar Lover
 
Joined: Apr 2011
Posts: 4,282
Likes: 387
Just a suggestion. You don't want to go to large on the intake . Heads have small ports
Old 11-16-2012 | 03:20 PM
  #5  
moe7404's Avatar
Mopar Lover
 
Joined: Nov 2012
Posts: 1,846
Likes: 139
the last year for the 273 was 1967. the 340 came out in 1968 as a much hier performance engine. NHRA refactored the HP of the 340 at least 3 times. since you have a 2 bbl carb you must have a 318. if you have a 1969. as the 360 didnt come out till 1970 or 1971.
Old 12-13-2012 | 04:48 PM
  #6  
65Val's Avatar
New Member
 
Joined: Dec 2012
Posts: 13
Likes: 2
From: BC Canada
Originally Posted by moe7404
the last year for the 273 was 1967. the 340 came out in 1968 as a much hier performance engine. NHRA refactored the HP of the 340 at least 3 times. since you have a 2 bbl carb you must have a 318. if you have a 1969. as the 360 didnt come out till 1970 or 1971.
Wrong...273 continued 'til '69...4bbl version stopped in '67, as well as the solid cam....hydraulic cam and 2bbl carb. for '68/'69.
Old 12-13-2012 | 06:08 PM
  #7  
TVLynn's Avatar
Mopar Lover
 
Joined: Apr 2011
Posts: 4,282
Likes: 387
Dealer friend bought a ? 71 340 RR with a bad engine. Put a 318 in it... So 30 years later anything is possible as to engine Try and read the casting #'s on the side if the block by the starter
Old 02-28-2013 | 08:37 PM
  #8  
moe7404's Avatar
Mopar Lover
 
Joined: Nov 2012
Posts: 1,846
Likes: 139
yep i mistakenly thought that the last year for the 273 was 67 cause the 340 came out in 68. oops sorry. a close friend bought a new 68 barracuda fastback, 340, 4 speed. VERY fast. this site is a lot better than some.
Old 03-03-2013 | 06:30 PM
  #9  
jacilynn_s's Avatar
Mopar Fanatic
 
Joined: Feb 2013
Posts: 356
Likes: 39
might be a stupid question but why put a 4 barrel on an engine that runs better with a 2 barrel on it?
Old 03-05-2013 | 03:18 PM
  #10  
moe7404's Avatar
Mopar Lover
 
Joined: Nov 2012
Posts: 1,846
Likes: 139
cause some people think that bigger is ALL WAYS better. a good running engine is a SYSTEM. not a part here and a part there. if you look at ALL the high performance cars by chrysler you will see that the parts on each car is NOT a bunch of misfits. its a system. take a 1965 chrysler 300 L. it is the only 300 with a single carb. thats NOT by accident. same with the rest, a 1966 street hemi, it was not ment to be as fast as a RACE HEMI, so thats what they made. ITS NOT AN ACCIDENT.
Old 04-03-2013 | 11:15 PM
  #11  
65Val's Avatar
New Member
 
Joined: Dec 2012
Posts: 13
Likes: 2
From: BC Canada
Originally Posted by jacilynn_s
might be a stupid question but why put a 4 barrel on an engine that runs better with a 2 barrel on it?
Are you kidding!!! The 273 2bbl carb is junk!! Obviously, you've never driven one. The AFB 4 barrel for that year is a vastly superior carb, even on the 2 barrel engines. Any 4bbl carb will wake up a 2 bbl 273, Carter or Holley.
Old 07-13-2013 | 08:15 PM
  #12  
moe7404's Avatar
Mopar Lover
 
Joined: Nov 2012
Posts: 1,846
Likes: 139
dont forget the 273 4 bbl carb is about the smallest 4 bbl ever made. and it is sized right for a 273. like i said if chrysler made it its a SYSTEM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NYCuda
Part(s) for Sale
2
04-22-2015 06:45 PM
northcoasttip
General Discussion
4
09-26-2011 11:23 PM
bcuda67
A-Body
12
02-04-2010 08:15 AM
mahd
General Technical Questions
1
08-03-2009 09:19 PM
bcuda67
Cuda Specific Discussion
0
07-25-2009 11:16 AM



Quick Reply: Need a 4bbl intake with carb for 69 dodge 273



All times are GMT -7. The time now is 03:25 AM.