273/318/360 Edelbrock Intake with 600 CFM Holley Carb
 

Hey guys,

I am selling an Edelbrock Performer 318/360 Intake (It also fits '65 and later 273s as far as I'm aware). It has a 600 CFM Holley on top of it. These parts were purchased by my grandfather years ago for the 'Cuda I now own, however the bolt angle was different on the 1964 273 so it wont fit properly. They are both in basically new condition, may want to consider new gaskets however as these have been sitting.

If you have any questions please feel free to PM me. I'm not quite sure what to ask, however I will link the "new" parts below. I would like to get maybe $350 for both, as the money would really help me out with my 'Cuda. I am located in Upstate NY and willing to drive a bit to meet someone.

http://www.jegs.com/i/Edelbrock/350/...rentProductId=

https://www.holley.com/products/fuel.../parts/0-1850S

Attachment 18814
Attachment 18815
Attachment 18816
Attachment 18817
Attachment 18818

That's a vacuum secondary carb not a double pumper, look for the numbers on the front of the choke tower there should be a model number, post that.
I think you have looked up the incorrect part, the carb you have is a little better.

Thank you, I corrected it.