Shawn's Chassis
04-22-2018, 02:38 AM
#32
Mopar Lover
Thread Starter
Probably Stage 1 Torqueflite , Stage 2 Powerglide, Stage 3 possibly one of those. Stage 3 will likely have to be a store bought Chromoly car. It won't be me, this car is killing me. I'm like Danny Glover "too old for this ****".
The following users liked this post:
RacerHog (04-22-2018)
04-22-2018, 05:14 PM
#33
Super Moderator
I've heard "if it don't kill ya it will make ya stronger ".
Looks Good!
Looks Good!
05-25-2018, 06:07 AM
#34
New Member
Join Date: Feb 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Cool build you are doing. Do you have a set of SFI plans to wrk off of
Do you have a set of SFI plans to wrk off of?
also on the 4-link bars you can make them any length you want.
longer bars make for alittle softer hit.
and depending upon the length you need to make your bar size accordingly.
also on the 4-link bars you can make them any length you want.
longer bars make for alittle softer hit.
and depending upon the length you need to make your bar size accordingly.
05-25-2018, 02:41 PM
#35
Mopar Lover
Thread Starter
Thanks. No SFI plans just going by NHRA general safety rules and copying some Pro Mod/Pro Stock style designs I will be looking for those SFI documents before we finalize everything. This is a mild steel mig welded chassis so when he steps up power and needs certification we'll cross that bridge. I know that if he gets to the top level he wants in 5-10 yrs it will have to be chromoly tig welded chassis which I won't be building.
We just took delivery of 4 link bars, adapters and rod ends, wishbone, anti-roll bar, wheelie bars and Strange rear calipers, a little bit of Christmas for Shawn. Now I can weld on the rear housing to get it hung and set pinion angle for engine mid and front mount.
We just took delivery of 4 link bars, adapters and rod ends, wishbone, anti-roll bar, wheelie bars and Strange rear calipers, a little bit of Christmas for Shawn. Now I can weld on the rear housing to get it hung and set pinion angle for engine mid and front mount.
05-25-2018, 06:21 PM
#36
New Member
Join Date: Feb 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. No SFI plans just going by NHRA general safety rules and copying some Pro Mod/Pro Stock style designs I will be looking for those SFI documents before we finalize everything. This is a mild steel mig welded chassis so when he steps up power and needs certification we'll cross that bridge. I know that if he gets to the top level he wants in 5-10 yrs it will have to be chromoly tig welded chassis which I won't be building.
We just took delivery of 4 link bars, adapters and rod ends, wishbone, anti-roll bar, wheelie bars and Strange rear calipers, a little bit of Christmas for Shawn. Now I can weld on the rear housing to get it hung and set pinion angle for engine mid and front mount.
We just took delivery of 4 link bars, adapters and rod ends, wishbone, anti-roll bar, wheelie bars and Strange rear calipers, a little bit of Christmas for Shawn. Now I can weld on the rear housing to get it hung and set pinion angle for engine mid and front mount.
before going any further, get those SFI prints .
I think they are like $35 and study them really good.
Rght off the bat I think the tube you have for maybe the trans mount is to far back from the firewall. Also SFI has specific bar size requirements and placement.
what diameter 4-link bars did you get?
05-25-2018, 06:55 PM
#39
Mopar Lover
Thread Starter
Haven't finalized that yet, likely 26-27" center of holes, the mock up of the wish bone shows it long, fitting into the package nicely when I get it welded up.
05-25-2018, 07:07 PM
#40
New Member
Join Date: Feb 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Lots of good info for free on the WWW but you also have to watch out for the BS
here are a cpl places to find good info.
www.yellowbullet.com
also go on YouTube and do a search for Tim McAmis race cars. He has some very goodtech videos on chassis design and setup.
here are a cpl places to find good info.
www.yellowbullet.com
also go on YouTube and do a search for Tim McAmis race cars. He has some very goodtech videos on chassis design and setup.
05-27-2018, 09:23 PM
#45
Super Moderator
I'm going to be the first to say, I like your axle choice.
05-28-2018, 04:54 AM
#46
Mopar Lover
Thread Starter
Here’s part of the reason progress has been slow, Shawn polished the box, rails and new to us wheels on Douglas. The wheels came about the same colour as the running boards. 1995 V10 gas 5 speed.
06-09-2018, 09:22 PM
#48
Mopar Lover
Thread Starter
Made this gizmo to line up driveshaft with housing and set driveline angles. Fabbed up transmission mount, need to mock up wheelie bars to tack on brackets so I can remove housing for final welding. Tomorrow I’ll measure material for mid mount.
06-10-2018, 08:14 AM
#49
Super Moderator
What motor trans combination are you useing?
06-16-2018, 04:56 PM
#51
Mopar Lover
Thread Starter
Fit another 25ft in today, 10 more feet to go.
Had some floor left over from the bathroom Shawn did, thought I’d try it in the car. What do you think, classy?
Had some floor left over from the bathroom Shawn did, thought I’d try it in the car. What do you think, classy?
06-22-2018, 03:46 PM
#55
Mopar Lover
Thread Starter
Last two pieces for center X left then final weld. We’re looking at the end zone gentlemen. I know 100 more things to do but I need a goal.
06-23-2018, 07:29 AM
#56
Super Moderator
Then after final mockup you get to pull it all apart and paint it.......
06-23-2018, 08:54 PM
#60
Super Moderator
Looks great!!!
