Stroker Kit for 360
 

I was wondering if anybody knows how to figure out how much hp my motor would make with a 4 inch stroker kit and a .04 over bore because I’m trying to make about 650 but don’t want to go to far over and blow the block I can send the exact kit if you need it

Lots of article's out there on the subject.... However, Their are a lot of variations. Only one way to find out and that is to put it together and dyno it and find out....
Or talk to your local engine guy and find out what numbers he has come up with in the combination of parts he is familiar with....
Keep us posted on what you decide to do....

Cheers

Just make sure you can’t see over the pile of cash needed because it will need to be very tall.

Your no fun !!!!! :(

Here is a nice little build from Brian at IMM out here in my area....
https://www.motortrend.com/how-to/cc...l-block-mopar/

Hope this helps you for your direction.

Not going to lye...

lol.... And i believe that... :)

Something most people don't do is put the true cost of there goal into there dream/goal. In today's world it's not hard to spend 13 to 15k for that kind of NA hp.