74 cuda interior need help
06-04-2009, 08:38 PM
#1
Guest
Posts: n/a
74 cuda interior need help
I have a 74 cuda and I don't know where the seat belt shoulder harness routes thru the side panel. my side panel has no cut in it to feed the shoulder belt thru. The side panels were not in it when I got the car and I am now ready to put the in, but I am not sure where they go. There are two belt coils, one near the front seats and one located about 12 inches under the rear window crank. Then it goes up the a bolt locateded in the hearliner. So the belt coil located under the rear window crank must go thru thr rear side panel, but my rear side panels are not cut out for it.
Thanks
Thanks
06-04-2009, 09:04 PM
#2
Mopar Lover
Join Date: Apr 2009
Location: Michigan: The First Line of Defense From The Canadians!
Posts: 1,892
Likes: 0
Received 4 Likes
on
4 Posts
Dont know if it ever routed through the side panel. Remember getting in the back of them and the seat belt was in the way. Like it was mounted on the floor and looped to the roof, and then came across. Stay tuned, an E-body guy will be here to help you soon. Good luck
07-08-2009, 05:58 AM
#4
Guest
Posts: n/a
Not sure if you are still looking for onfo on this....
I have a 72 fish and was wondering the same thing...
The later year ebodies apparanty had a slot in the rear side panels fopr this purpose......
You may have older side panels....they will fit I guess but wont have the slot.....at least that is what I came to conclude....
I have a 72 fish and was wondering the same thing...
The later year ebodies apparanty had a slot in the rear side panels fopr this purpose......
You may have older side panels....they will fit I guess but wont have the slot.....at least that is what I came to conclude....
Thread
Thread Starter
Forum
Replies
Last Post
