5.9 magnum Manual trans conversion
#1
New Member
Thread Starter
Join Date: Apr 2020
Location: In the mountains of Puerto Rico. A small island in the Caribe
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
5.9 magnum Manual trans conversion
Im planning on converting auto my truck to a manual transmission. My doubts are if its possible. What do i need? Is there something in particular that i need to know?
#2
Mopar Lover
Welcome.
The key issue will be the balance weight of the flywheel. The engine is externally balanced and slightly different than the LA 360 so you’ll need a flywheel specific to the 5.9 Magnum. These can be purchased aftermarket but are expensive. This question has come up in the Mopar community so an internet search should find answers.
The key issue will be the balance weight of the flywheel. The engine is externally balanced and slightly different than the LA 360 so you’ll need a flywheel specific to the 5.9 Magnum. These can be purchased aftermarket but are expensive. This question has come up in the Mopar community so an internet search should find answers.
Thread
Thread Starter
Forum
Replies
Last Post