Hello everyone

ploskidart340 · 09-16-2007, 06:01 PM

Hello, I am a new member. I was wondering if anyone could help me with an issue? I have a 71 340 that I installed a Mopar 484 lift cam in. It has aerohead 2.02/1.60 heads w/509 springs. I am running a little rich, white smoke but not water. You can smell the richness. Is this smoke normal just after break in of cam? Or is my timing still off? Please help

1 Bad Mirada · 10-10-2007, 11:13 AM

Where are you setting the timing?

09-16-2007, 06:01 PM	#1 (permalink)
ploskidart340 Junior Member Join Date: Sep 2007 Posts: 2	Hello everyone Hello, I am a new member. I was wondering if anyone could help me with an issue? I have a 71 340 that I installed a Mopar 484 lift cam in. It has aerohead 2.02/1.60 heads w/509 springs. I am running a little rich, white smoke but not water. You can smell the richness. Is this smoke normal just after break in of cam? Or is my timing still off? Please help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2007, 11:13 AM	#2 (permalink)
1 Bad Mirada Administrator Join Date: May 2006 Posts: 81	Where are you setting the timing?