mark1818

I have a dodge 5.9 360 and i want to turbo it any kits out the or how and what do i us to do it?

78doubleR

no direct fit kits are made. Your gunna have to hand fabricate manifolds and cold/hot side pipes plus the exhaust.

78D200

Welcome!

What is the motor in?

rickyr

welcome to the forum

Coronet 500

Welcome. Many guys take the truck cast iron manifolds swap sides pointing forward and cross over under the crank pulley to join up on the passenger side to the flange. Take the pressure side to a blow through carb. Methanol injection or intercooler to cool down the intake charge. A single plane intake manifold is best. This is something I plan to do with one of our 318's.
This spot has good info: http://www.theturboforums.com/smf/mo...eiskesu0cggbm6

I learned a bunch and there are some good examples of DIY turbos. Of all the forums I have joined this one right here is the one I like the best.

mark1818

5.9 360 motor what would be a good turbo to put on there?