440 Source CNC Stealth Head?
#1
New Member
Thread Starter
Join Date: Sep 2011
Location: Ontario, Canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
440 Source CNC Stealth Head?
Has anyone used these heads or seen them in person. The reason i ask is i'm thinking about buying a set for my car and would like some input on them. I know there cnc'd and assembled at MCH but how are the parts they use like valves,springs and retainers quality wise?
Thanks for all and any info
Kevin
Thanks for all and any info
Kevin
#3
Super Moderator
I had a pair of the Stealth Heads before I stepped up to the RPM Performers..They are a good bang for the buck...however the springs...retainers and locks are poor. Get the better locks and retainers and remember that their valves are 11/32". People have put the wrong size locks and retainers on before with terrible results. Match your springs to your cam. Do not try to go cheap on the springs...retainers and locks.
Thread
Thread Starter
Forum
Replies
Last Post
78trailduster
Performance parts and engine development
8
11-28-2012 08:09 PM