putting a 440 into a 6 cyinder dart
11-09-2011, 04:57 PM
#1
New Member
Thread Starter
Join Date: Nov 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
putting a 440 into a 6 cyinder dart
I have a '70 dart & a '63 dart both 6 cylinders. and have a 440 &727.
just sitting here. so what needs to be done. How big of a can of warms am I opening? Some people say you have too replace the K Member but can it done without having to do that?
just sitting here. so what needs to be done. How big of a can of warms am I opening? Some people say you have too replace the K Member but can it done without having to do that?
11-10-2011, 05:15 AM
#2
New Member
Join Date: Nov 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I'm going through a similar delima...I've got a 50 Plymouth Special Deluxe with the straight 6 and a 440/727 waiting for a new home. The problem is I have NO idea if this thing will fit in there without alot of cutting and grinding of the fender/wheel wells and the firewall! I'm actually thinking of getting a huge block of foam and "making" a full-size 440 out of it to see if it'll fit in there at all before I try to fight hundreds of lbs of engine on a hoist and damage anything.
11-10-2011, 05:59 AM
#3
Mopar Fanatic
Join Date: Dec 2010
Location: va.
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
CantRamItDodgeIt91
General Technical Questions
5
07-23-2009 11:19 AM
