differential with posi

danuwells · 08-04-2007, 12:10 AM

i need to get it rebuilt theres alot of slack in it now and i can hear it rumbling when im coming to a stop. how much do you think its going to cost me i looked at it and i dont even see how it comes apart its a 69 differential if that helps

ucfierocharger · 08-04-2007, 02:37 PM

What size is the dif? if its an 8 3/4 then it pulls out the front of the dif and if you look from the back it looks solid. If i remember right then you have to pull out the rear axles from the side before pulling the gears out the case.

danuwells · 08-04-2007, 08:32 PM

yea see im only 17 but i remeber my dad saying that the axels pull out the sides

ucfierocharger · 08-05-2007, 10:58 AM

no problems, I was 17 when I had to replace my rear dif gasket (only 3 years ago). get under the car and look at the dif case. If it apears solid from the back and there are bolts in the front then it is an 8 3/4 just as mine is. You can pick up a dif from the junk yard for like $75-$100. Where are you located? If your close to me, I could probably find one

08-04-2007, 12:10 AM	#1 (permalink)
danuwells Junior Member Join Date: Aug 2007 Posts: 4	differential with posi i need to get it rebuilt theres alot of slack in it now and i can hear it rumbling when im coming to a stop. how much do you think its going to cost me i looked at it and i dont even see how it comes apart its a 69 differential if that helps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Holley 1920	thekinzuakid247	A-Body	0	01-12-2007 03:26 PM

08-04-2007, 02:37 PM	#2 (permalink)
ucfierocharger USB car drive man Join Date: Jun 2007 Location: Cincinnati OH Posts: 139	What size is the dif? if its an 8 3/4 then it pulls out the front of the dif and if you look from the back it looks solid. If i remember right then you have to pull out the rear axles from the side before pulling the gears out the case.

08-04-2007, 08:32 PM	#3 (permalink)
danuwells Junior Member Join Date: Aug 2007 Posts: 4	yea see im only 17 but i remeber my dad saying that the axels pull out the sides

08-05-2007, 10:58 AM	#4 (permalink)
ucfierocharger USB car drive man Join Date: Jun 2007 Location: Cincinnati OH Posts: 139	no problems, I was 17 when I had to replace my rear dif gasket (only 3 years ago). get under the car and look at the dif case. If it apears solid from the back and there are bolts in the front then it is an 8 3/4 just as mine is. You can pick up a dif from the junk yard for like $75-$100. Where are you located? If your close to me, I could probably find one