Milodon Oil Pan, MSD Distributor & Comp Cams Kit
10-14-2012, 04:28 PM
#1
New Member
Thread Starter
Join Date: Sep 2012
Location: Milan, Illinois
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Milodon Oil Pan, MSD Distributor & Comp Cams Kit
I have a Milodon Oil Pan, MSD Distributor & a Comp Cams Cam Kit (cam, lifters, springs, chain & push rods) for sale. All parts cam out of my 70 Road Runner.
The Milodon oil pan is a 7 qt. steel pan with pick up.
http://www.summitracing.com/parts/MIL-30930/ $260 new.
The MSD Distributor is a Pro-Billet Ready-To-Run with vacuum advance.
http://www.summitracing.com/parts/MSD-8387/ $380 new.
The Comp Cams Kit is a one bolt hydraulic flat tappet with a .545” lift / 241 int. 247 ex. Duration @ .050’. The complete kit comes with lifters, valve springs, double roller timing chain and I’ll throw in the 3/8” push rods. Does not come with the keepers or retainers.
http://www.summitracing.com/parts/CCA-K21-228-4/ $470 new.
These parts cam off/out of my stroked 13:1 Victor Headed 440 (528). I had bought everything new when I had the engine built about 4 years ago. Total miles are only 1189. The reason I pulled these off is because of an upgrade: {Roller cam, a Charlie’s Fabricated Aluminum Pan & taller MSD Distributor}. With this cam, I had gotten 496 hp & 515 lbs ft of torque at the wheels
http://www.streetfire.net/video/bills-motor_186763.htm
http://www.streetfire.net/video/bills-road-runner-on-e85_698358.htm
. I am not out to screw any one, nor am I trying to get rich. There is nothing wrong with these parts. I just need to clean out my garage. Looking for a reasonable offer, but please, don’t insult me.
My cell number is 309-738-9376.
My e-mail address is sfcwcs@yahoo.com
Thanx,
Bill
The Milodon oil pan is a 7 qt. steel pan with pick up.
http://www.summitracing.com/parts/MIL-30930/ $260 new.
The MSD Distributor is a Pro-Billet Ready-To-Run with vacuum advance.
http://www.summitracing.com/parts/MSD-8387/ $380 new.
The Comp Cams Kit is a one bolt hydraulic flat tappet with a .545” lift / 241 int. 247 ex. Duration @ .050’. The complete kit comes with lifters, valve springs, double roller timing chain and I’ll throw in the 3/8” push rods. Does not come with the keepers or retainers.
http://www.summitracing.com/parts/CCA-K21-228-4/ $470 new.
These parts cam off/out of my stroked 13:1 Victor Headed 440 (528). I had bought everything new when I had the engine built about 4 years ago. Total miles are only 1189. The reason I pulled these off is because of an upgrade: {Roller cam, a Charlie’s Fabricated Aluminum Pan & taller MSD Distributor}. With this cam, I had gotten 496 hp & 515 lbs ft of torque at the wheels
http://www.streetfire.net/video/bills-motor_186763.htm
http://www.streetfire.net/video/bills-road-runner-on-e85_698358.htm
. I am not out to screw any one, nor am I trying to get rich. There is nothing wrong with these parts. I just need to clean out my garage. Looking for a reasonable offer, but please, don’t insult me.
My cell number is 309-738-9376.
My e-mail address is sfcwcs@yahoo.com
Thanx,
Bill
Last edited by 3rd1970RR; 10-14-2012 at 04:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dzltd02
General Technical Questions
0
10-28-2008 08:25 AM
