Andre11

I have a 1973 roadrunner my pulley wont come off the pump so i have to buy a new one, and I have looked around and cant seem to find any sites that sell them. Would like to know some websites that may have them if anyones knows of any
thanks

richinny

you need a puller, you could try letting a machine shop or garage remove it. you might need an installer too.

Impact

I had the same trouble with the pulley on my 74 Roadrunner. I bought a puller for about $35 at the local auto parts store.

What engine do you have in yours? I have found that i could swap engine parts with Dodge Ram trucks on my 360. They seem to have a lot in common. You can go up to 86 or 87 and many of the small block parts are identical. Just make sure you measure your pulley and replace it with one that is the same dia.