"Fire in the Hole"

Thread Tools
 
Search this Thread
 
Old 12-21-2010 | 06:36 PM
  #1  
MReeves's Avatar
Thread Starter
Mopar Lover
 
Joined: Jul 2009
Posts: 4,520
Likes: 117
From: DeLeon Springs, Florida
"Fire in the Hole"

After more than a year of working on this project it finally came to life tonight...... My wife under the wheel and me under the hood it fired and is running.... Need to get some tuning done for it has a very rough idle but will work on that.. The important thing is that its running on its own.... Plan to get a video tomorrow night or at least hope to... More as I get er done!!!!!
Old 12-21-2010 | 06:57 PM
  #2  
Silverick's Avatar
Mopar Lover
 
Joined: Aug 2010
Posts: 1,171
Likes: 34
From: San Francisco, CA
Great! Looking forward to the video!
Old 12-22-2010 | 04:21 AM
  #3  
78D200's Avatar
Admin
 
Joined: Apr 2008
Posts: 8,173
Likes: 200
From: Goffstown, NH
Good to hear Mack!
Old 12-23-2010 | 04:35 PM
  #4  
67 GTX's Avatar
Mopar Lover
 
Joined: Jul 2008
Posts: 6,204
Likes: 4
From: Brooklyn, N.Y.
Originally Posted by 78D200
Good to hear Mack!
2x on that
Old 12-23-2010 | 09:51 PM
  #5  
John Van's Avatar
Mopar Fanatic
 
Joined: Jun 2009
Posts: 448
Likes: 11
From: Rensselaer,New York
Can't wait for the video! Make sure to get close to the exhaust,I miss the sound of a real car!
Old 12-24-2010 | 05:15 PM
  #6  
62Furious's Avatar
Mopar Lover
 
Joined: Oct 2009
Posts: 722
Likes: 19
From: SOUTH EAST WISCONSIN
Waiting to see if it is a Merry Christmas and nothing yet
Old 12-24-2010 | 05:41 PM
  #7  
MReeves's Avatar
Thread Starter
Mopar Lover
 
Joined: Jul 2009
Posts: 4,520
Likes: 117
From: DeLeon Springs, Florida
Just a quick update... It moved under its own power today... Moved it from the work garage to the house garage. I believe I have a sensor shorting out or something.. Hard to start and even harder to keep it running... I had to move it because the family will be at our house on Sunday for gathering.. the only space bid enough for all 33 is our garage.. So have to convert from working shop to a eating, present opening and general party house.... Got that done today and will work on the Challenger on Monday.... Home all week next week so should get it done.. Or at least that is the plan.... Merry Christmas to all from our house to yours.... Mack
Old 12-29-2010 | 07:14 AM
  #8  
MReeves's Avatar
Thread Starter
Mopar Lover
 
Joined: Jul 2009
Posts: 4,520
Likes: 117
From: DeLeon Springs, Florida
Quick reply on progress so far this week.... Discovered that when I changed main harness some of the wires were different colors and did different things... so finally got the air temp, water temp, and tps working right.. The BIG one was the map... It made all the difference in the world... Now need to fine tune the start timing and fuel mix. Still getting a pop once in a while when starting. And I may have to learn what the car wants to start... Anyway, making progress, but still didn't take the time for the video.. I was getting a lot done and just didn't want to stop for that... But hopefully today....
Old 01-03-2011 | 03:36 AM
  #9  
78D200's Avatar
Admin
 
Joined: Apr 2008
Posts: 8,173
Likes: 200
From: Goffstown, NH
I'm glad that you were able to find the issues and get them corrected Mack. It doesn't sound like you have that much left to do.
Old 01-03-2011 | 05:14 AM
  #10  
MReeves's Avatar
Thread Starter
Mopar Lover
 
Joined: Jul 2009
Posts: 4,520
Likes: 117
From: DeLeon Springs, Florida
Tim, you are right... Its all little things.. Radiator overflow bottle... Align the alternator... Pull one wire to fuel pump relay for manual switch for fuel checks..... And several more like that... But getting very close for sure.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
re-animate
Interior/Exterior Body and Trim
1
07-29-2012 10:11 PM
wingnutt2420
General Discussion
3
01-08-2011 11:23 AM
CadVetteStang
Current Jeep Models
0
08-30-2009 08:04 AM
Crazy4Carz.Com
General Discussion
15
08-17-2009 08:55 PM
runninbird
General Discussion
2
12-05-2007 02:22 PM




All times are GMT -7. The time now is 06:42 AM.