68 C Body Fury lll
#2
Mopar Lover
Hi Tom. Welcome to the forum.
I don't have the answer for you but would like the hear about your Fury. There are a few Fury owners here in the mix!
Somebody will come along with the information that you need!
I don't have the answer for you but would like the hear about your Fury. There are a few Fury owners here in the mix!
Somebody will come along with the information that you need!
#3
68 Fury lll convert.
Thanks for the reply. The Fury is a red convert. original 318. I'm restoring it and have a doner 68 VIP with a good 440 tnt motor and tran. My Fury was restored by a hacker a few years back and it's being stripped down to bare metal and repaired with good metal and interior from the VIP. I will have many good spare parts.
Thanks again, Tom
Thanks again, Tom
#4
I can't tell you how cuz I am not big on numbers but I know the information you are looking for is there. Maybe if you started a thread with (vin numbers?) in the title you might get more people looking at it. I don't know how many c-body fans there are, but I would guess there are quite a few folks out side the big car crowd, that know the vin number system. As well as option codes, build location, and such.
#6
Seat covers are going to be after market like year one or some thing.
As for the front disc's your best bet is later model c-body donors and they are drying up fast. There are after market kits but I have not heard anything good about c-body offerings. You should try "c-bodydrydock" this site is c-body only and the folks are very knowledgeable and helpful. These subjects are often up on the boards.
As for the front disc's your best bet is later model c-body donors and they are drying up fast. There are after market kits but I have not heard anything good about c-body offerings. You should try "c-bodydrydock" this site is c-body only and the folks are very knowledgeable and helpful. These subjects are often up on the boards.
#8
69 Plymouth Fury III (Sport Fury)
I purchased a C body out of Virginia with a title, however I am registering it in NC and the inspector states that my car was flagged because of the round rivets not flower rivets on the dash. In addition, I do have a vin plate on the radiator rail. Can anyone tell me where the "other" vin is located. He states that there should be a plate on the cowl above the voltage regulator and a plate in the trunk. However, in my research I did not think that they were located anywhere else but on the two locations.
I really need help so that I can get my car registered with the original vin as the inspector wants to give me a NC state issued vin. No GO!~!!!
I really need help so that I can get my car registered with the original vin as the inspector wants to give me a NC state issued vin. No GO!~!!!
#9
Super Moderator
I purchased a C body out of Virginia with a title, however I am registering it in NC and the inspector states that my car was flagged because of the round rivets not flower rivets on the dash. In addition, I do have a vin plate on the radiator rail. Can anyone tell me where the "other" vin is located. He states that there should be a plate on the cowl above the voltage regulator and a plate in the trunk. However, in my research I did not think that they were located anywhere else but on the two locations.
I really need help so that I can get my car registered with the original vin as the inspector wants to give me a NC state issued vin. No GO!~!!!
I really need help so that I can get my car registered with the original vin as the inspector wants to give me a NC state issued vin. No GO!~!!!
Thread
Thread Starter
Forum
Replies
Last Post