Hi Guys!

I really really need a photo of the throttle/kickdown linkage on a STOCK 4 BBL carb on a Big block mated to a 63', 63', 64' or 65' 727 tranny! Need to compare the position on the stock carb so I can replicate it on an Edlebrock!

 

Bump!

No one has a stock 4BBL on a 383?

 

try pm'ing printdoc

 

Hi 64 Fury ,i have a 4 bbl on my 318 poly.will that help?

 

It will help him out.

 

Okay i will try and send it this afternoon.im not good at sending pics on the forum ,but i will try or send it by regular email.Hope it helps

 

if you want, send it to my email and I'll post it up here for ya. get a few shots if posible.

 

Hi Tim ,sounds good ,if you like you can pm me your email address and i will send you the pics so you can post them

 

Here are some pics from pjmopar's 318 w/4barrel. Hope these help.

 

Wow! Thanks guys! Those pics are exactly what I need! I have to Fab up a linkage where the throttle cable and kickdown cable are close to what they are on the stock linkage, mine appear to be off, the kickdown isn't engaging until way after the carb is at WOT.

 

Glad to help