1970 Super Bee 4-speed conversion question
#1
Guest
Posts: n/a
1970 Super Bee 4-speed conversion question
I am converting my 1970 Super Bee from Automatic to 4-speed. Just tonight I installed the clutch/brake pedal assembly & noticed something. The brake pedal rests considerably lower than the clutch pedal. If I bring the clutch pedal all the way up to the bumper stop on the pedal bracket it sits at least a couple of inches higher than the brake pedal. I have power brakes and hooked everything to the brake pedal as it was on the automatic pedal. Only thing I can figure is the manual trans with power brakes may have had a longer brake pedal pushrod. Can anyone enlighten me on this? I would appreciate the help. Thanks
#2
thinkin with me dipstick
almost positive the pedals are the same aside from the part where your foot goes. also once everything is hooked up with the clutch the pedal position changes
Thread
Thread Starter
Forum
Replies
Last Post