what should the fuel pressure be set at?
04-18-2010, 10:00 AM
#1
Member
Thread Starter
Join Date: Oct 2007
Location: Sudbury ON
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
what should the fuel pressure be set at?
71 383.
Casting number g383
fittied with
MSD 6AL electonic ignition system with 7000 rpm chip
MSD blaster pack
Accel 9mm wires
Holley 3310 780 cfm four barrel & Large K&N airfilter
Weilend Team G intake Port size is 2.24" high by 1.15" wide. Manifold height is 4.69" in the front and 5.69" in the rear
Aftermarket Camshaft, connecting rods, pistons during rebuild. Not sure of what these components are. The Cam is lopey (sounds aggressive at idle)
Summit Race Headers
Casting number g383
fittied with
MSD 6AL electonic ignition system with 7000 rpm chip
MSD blaster pack
Accel 9mm wires
Holley 3310 780 cfm four barrel & Large K&N airfilter
Weilend Team G intake Port size is 2.24" high by 1.15" wide. Manifold height is 4.69" in the front and 5.69" in the rear
Aftermarket Camshaft, connecting rods, pistons during rebuild. Not sure of what these components are. The Cam is lopey (sounds aggressive at idle)
Summit Race Headers
Thread
Thread Starter
Forum
Replies
Last Post
Younggun
Engines, Exhaust and Fuel systems
2
07-30-2012 02:36 AM
