Which Hemi Aluminum block is best ??
11-07-2011 | 11:39 PM
#1
Thread Starter
New Member
Joined: Nov 2011
Posts: 1
Likes: 0
Which Hemi Aluminum block is best ??
For a 426 Hemi.
4.25 bore and 4.15 stroke.
Must be aluminum and for street use so its got to be properly water cooled.
Can be external oil feed to oil pump.
The choices are -
Keith Black
World
Indy
They seem to all price about the same once you select the build options you want therefore cost between them in not an issue, so we are only talking about casting quality, cast/design features, finish, dry or wet sleeve etc;
Anyone got any experience with these ???
4.25 bore and 4.15 stroke.
Must be aluminum and for street use so its got to be properly water cooled.
Can be external oil feed to oil pump.
The choices are -
Keith Black
World
Indy
They seem to all price about the same once you select the build options you want therefore cost between them in not an issue, so we are only talking about casting quality, cast/design features, finish, dry or wet sleeve etc;
Anyone got any experience with these ???
11-09-2011 | 06:39 PM
#2
Mopar Lover
Joined: Apr 2009
Posts: 1,892
Likes: 4
From: Michigan: The First Line of Defense From The Canadians!
From what I saw on the web, World products may not be long for this world. Most of the posts I saw are evenly split between Indy, and KB. There was more info there, but I wont to post a link to a competing forum.
Thread
Thread Starter
Forum
Replies
Last Post
7T_ChargerBlues
Engines, Exhaust and Fuel systems
14
02-29-2012 10:06 PM
426HemiHammy
General Technical Questions
7
04-29-2011 07:15 PM
NMCA Jeff
shopHEMI.com NMCA's LATE MODEL HEMI SHOOTOUT - 5-7 JUNE 2009
0
02-02-2009 10:41 AM
