Quad to edelbrock
Thread Starter
New Member
Joined: Apr 2022
Posts: 1
Likes: 0
Quad to edelbrock
I need help.
I removed my quad off my 1974 challenger 360 4 bbl
trying to install edelbrock
the quad has 4 lines coming from the front ie pcv valve, distributor vacuum line then one line goes to (believe it or not) the radiator. And finally one from the charcoal canister
on the back of the quad is are two hoses. I believe one goes to a gas consumption gauge
the edelbrock simply has three in the front. Vacuum line and pcv line
how do I hook up the edelbrock?
too many lines and not enough inlets
help please
I removed my quad off my 1974 challenger 360 4 bbl
trying to install edelbrock
the quad has 4 lines coming from the front ie pcv valve, distributor vacuum line then one line goes to (believe it or not) the radiator. And finally one from the charcoal canister
on the back of the quad is are two hoses. I believe one goes to a gas consumption gauge
the edelbrock simply has three in the front. Vacuum line and pcv line
how do I hook up the edelbrock?
too many lines and not enough inlets
help please
Mopar Lover
Joined: Apr 2010
Posts: 1,889
Likes: 170
From: Long Island, NY
74 -
Full (manifold) vacuum to PCV and brake power booster and ported vacuum to distributor advance housing.
Plug the rest (both in and out).
Sorry, no idea what a gas consumption gauge is on a 74
.
Archer
Full (manifold) vacuum to PCV and brake power booster and ported vacuum to distributor advance housing.
Plug the rest (both in and out).
Sorry, no idea what a gas consumption gauge is on a 74
.Archer
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
Mopar Classifieds
0
Nov 13, 2011 05:35 PM
