1964 - 426 Street/Max wedge
#2
Super Moderator
Check the numbers on the heads as 2.02 is not the size valve for a 915 but a 916 head.
The 915 head is a 1967 part.
The 915 head is a 1967 part.
Last edited by Iowan; 06-29-2021 at 11:58 AM.
The following users liked this post:
scot426Mw (06-29-2021)
#3
Thank you so much, you are correct, I was thinking of my 442 heads for some reason. The intakes are 2.08 D.C. p3690708 and the exhaust are 1.74 D.C P3690709. I found them in my D.C. book to verify size and it is stamped on the boxes they are in. Yes, they are the small chamber 67 HP head. Apparently the only one better is a stage 5?
Thank you again for setting me straight. Hope I can find this a home, the price is negotiable.
a
Thank you again for setting me straight. Hope I can find this a home, the price is negotiable.
a
#4
Super Moderator
So do the 915 heads come with the 426 or are they 916?
And the 915 aren't the hp head it's the only head in 67.
And the 915 aren't the hp head it's the only head in 67.
The following users liked this post:
scot426Mw (06-29-2021)
#5
The 915's are part of the package, and yes they are specific to 67 the 440 HP. My D.C. guide shows the following for the 915:
Thank you. I am learning a lot to try to find a home for this project.
Thank you. I am learning a lot to try to find a home for this project.
#6
Super Moderator
Thanks for clarifying
Thread
Thread Starter
Forum
Replies
Last Post