Transmission leak from bellhousing
#1
Transmission leak from bellhousing
Hey all I'm looking for creative solutions.
I spent about a year fixing up my w150. 360 paired with a 727. Got it running well this week! Now though, the transmission that the PO claimed had been rebuilt is spitting ATF out of the bellhousing onto the exhaust. I need the truck running so I'm just going to take it to a transmission shop and bite the bullet. Trying to come up with some way to keep it from bursting into flames on the 10 mile drive. There is not a dust cover on the bellhousing, do those seal well enough to keep the fluid mostly from pouring out? Any other ideas?
I spent about a year fixing up my w150. 360 paired with a 727. Got it running well this week! Now though, the transmission that the PO claimed had been rebuilt is spitting ATF out of the bellhousing onto the exhaust. I need the truck running so I'm just going to take it to a transmission shop and bite the bullet. Trying to come up with some way to keep it from bursting into flames on the 10 mile drive. There is not a dust cover on the bellhousing, do those seal well enough to keep the fluid mostly from pouring out? Any other ideas?
#2
Super Moderator
Have it towed....
You will run it low on fluid and burn it up.....
You will run it low on fluid and burn it up.....
Last edited by Iowan; 01-09-2020 at 01:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
69POLARA383
Transmissions, Transfer Cases and Rear Ends
5
03-29-2012 01:04 PM
RandyYJ
Transmissions, Transfer Cases and Rear Ends
8
03-19-2012 03:57 PM