|
So its been a little while. I removed the exhaust that I had installed about a month ago and installed a set of Hooker Comp headers and Hooker header back exhaust kit. Ended up breaking a bolt in the drover's side head so while that is out getting removed at the machine shop, I went out and got a little treat for the motor. Holley 4160, electric choke, 600 CFM carb, Weiand Action +Plus intake, Mopar Performance air cleaner and valve covers, and a carpet kit for the inside. I'll be treating the rear axle to a brand new Power Trak locker and some Royal Purple fluids.
Once that is all said and done, an MSD dizzy and computer will be installed along with a custom wooden bed, 32 gallon fuel cell and a hand fabricated instrument cluster. After that, I'll see about pulling the tranny and rebuilding it with a TCI reabuild kit and throw in a shift kit and TCI 1200 RPM stall convertor. At some point I have to install the new front control arms, coils and shocks that I have sitting on my tool box and get an alignment done.
She is coming along nicely.
|