Back Halving 67 Coronet???
#1
Back Halving 67 Coronet???
Well I've been searching for pics of a back halved 67 Coronet and cant seem to find any. Im getting ready to start on mine and was wondering if anyone has some pics of theirs. Would like to back half with a 4 link. Just wanting to get a rough idea on how much to cut out. I dont wanna take too much out. I want to keep full stock interior also, If anyone could help it would be awesome. PM me if you can send pics to email.
#2
Sorry i don't have pix , we did a few Mopar B bodies .
I would seriously look at ladder bars , they are easier to set up & seem to hook better , I was pulling the front wheels on the street with sticky Dot tires .
Moving the frame rails in will definatly help the small wheel well problem but you will need to get a custom fuel tank as it goes from frame rail to frame rail
I would seriously look at ladder bars , they are easier to set up & seem to hook better , I was pulling the front wheels on the street with sticky Dot tires .
Moving the frame rails in will definatly help the small wheel well problem but you will need to get a custom fuel tank as it goes from frame rail to frame rail
#3
Mopar Lover
back in the 80's I mini tubbed my car with lakewood traction bars and it hooks and goes, I can fit a 12 inch rim with the right offset. If I would build another Mopar I would do the mini tub and caltrax bars because caltrax have movement where the lakewoods have no suspention movement on the street [very stiff]. How ever you build take pics, they will help on your next build and we like them
Thread
Thread Starter
Forum
Replies
Last Post
66coronetgirlie
B-Body
21
02-25-2008 05:40 AM