Hi everyone I have a 1966 Monaco with a 383 2bbl. i got it off my cousin and they screwed up the electrical they did something stupid that ended up melting the fuse box so i replaced it just like i took it apart. but now one brake light work driver side the blinkers are blinking the diagonal from each other and the dash lights don't work. had this guy look at it and he got the brake lights fixed but then after like two weeks it messes up again took back same thing fixed two weeks later broke. anyone have any idea i want to get it fixed thanks.

 

Welcome to the forums, how's your level of electrical knowledge ? It sounds like you have a lot of tracing to do. Maybe it's only a couple of bad connections though. We'll help if we can.

 

thanks for the welcome glad i found this place. i have recently gone though schooling for cars which would be UTI one of the top in my class and have advanced training in volkswagen. i know a decent amount but no one knows everything. i figured that i'm going to need to do some tracing but i don't know where to start and i can't find a wiring diagram for this car. one of my teachers said that the turn signal switch is where a lot of the wires for the brake lights are and i'm thinking that when my cousin melted the fuse box that it might have got melted to.

 

I hope you can see this, if not let me know.

 

Sorry can't really make it out

 

Can you cut/paste it somewhere else and blow it up, or I can send it to an e-mail addy. Let me know.

 

http://www.mymopar.com/downloads/196...araMonacoA.JPG http://www.mymopar.com/downloads/196...araMonacoB.JPG There ya go, just easier to copy the link location and paste it from my "secret" site.. I'm a car guy and an electrician by trade so I might be able to help. Good luck.

 

You guys rock i got the pictures from your secret site printed them now any ideas where i should start.

 

Start by very accuratley describing what was done and what works, what doesnt and whats acting weird. Guages, ashtray light, inst. lights, domes?

 

well my cousin did something not sure but it involved him connecting the headlights to the battery directly which ended up melting the fuse box. My dad replaced the fuse box. the problem is my driver side brake light works but the passenger side does not. the blinkers goes left front and right rear and right front and left rear. one back up light does not work but i think thats a bad bulb. the dash lights use to work but now don't same with the transmission light indicator in the console. sometimes the headlights won't work but if you play with the high beam switch they will come on. and the horn don't work. but the park lights work fine.I think thats it any ideas. if any more questions i ll try to answer them. but i'm thinking its the Direction signal switch got fired too.

 

K, start with the turn sigs. Say you put the LEFT blinker on, does it go left front and right rear, or right front and left rear?

 

welcome to the forum

 

sorry guys my battery is dead right now got to wait a couple of days to get the money for new one. been trying all day to get the battery charged and it won't take it has two dead cells. But if there is anything i can do now until i get the new battery or should i just wait some more.

 

Well ya could leave the batt in the car on a trickle charge and do testing.

 

it won't blow up the battery?

 

It shouldn't hurt anything on a trickle, do your checks and then un hook it.
Safety first though, if the sides of the batt are getting warm on a trickle charge which it shouldn't, stop. Keep us posted.

 

Ok You got I'll give it a try it shouldn't take long any ways. thanks you guys rock.

 

ok guys here the findings blinker switch in left: rear blinks front does not. Blinker switch in right position: both blink. Parks on: all lights light. Brake pedal pushed: driver side only, all bulbs in passenger side are good. Battery can't put enough power for headlights. Any ideas? thanks

 

Found the problem it was the directional turn switch the contacts aren't making connection for the passenger brake light. I jumped it and pushed the brake and it worked!!! But now I need a new directional turn switch and Autozone napa don't have it any ideas where to get one? Thanks

 

The Wells brand of auto parts has a listing for a
"Turn Signal Switch Repair Kit" for your car..
(Part # TSR105)

http://www.e-webcatalog.com/wells/ecatalog.aspx

In my area, Carquest and Autozone carry Wells brand parts..
If you can't find 'em, call their Support Hotline: 1-800-558-9770.
When prompted, press: 1 for Customer Service
and ask 'em for a retailer near you..

hope that helps ya
good luck

 

Way to go 68!

 

first place to look would be ebay

 

Alright i found one at http://www.arizonaparts.com for $70. its a reproduction. cool guy if you guys need anything give him a call. has decent prices i also got a service Manual for $27.00 its from 1966 and its brand new. year one wanted $169 for the same turn signal switch. tomorrow I'm going install it I'll update on how it works out. thanks for all your help.

 

Ok all the brake lights come on sort of the driver side outer one is bright and the rest or them are super dull. if you hold the brake on for a while the bulbs get a little brighter.

 

Sounds like a bad ground or connection, go from the bright one to the other side and look for a bad connection etc. Gettin there.

 

Po-daddy is right . Thats the #1 clue to a bad ground.

 

Yo dat home slice...lmfao

 

polara should be in a straight jacket
lol

 

Grrrrrr, bondage! I'm not here to judge you folks!