New to this and need help
#1
New Member
Thread Starter
Join Date: Jun 2014
Location: Wisconsin
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New to this and need help
I have a 1982 D150 with a slant 6. I picked up a 318 at a salvage yard and having it rebuilt. Looking for advice on a good, cost friendly intake manifold and 4brl carb or work with this. Also looking to lower this truck.
#2
Mopar Lover
Go back and get the trans, crossmember, linkage, radiator, fan shroud, For the change over.....
Pick up an Edlebrock Performer intake and a 650 Holley Carb.
Get a set of headers and some flowmasters...
2800 Stall convertor for the trans
Good orange Ignition box....
3.55 in the diff out back.....
It will run like a champ and still pull around 18 MPG around town..
Pick up an Edlebrock Performer intake and a 650 Holley Carb.
Get a set of headers and some flowmasters...
2800 Stall convertor for the trans
Good orange Ignition box....
3.55 in the diff out back.....
It will run like a champ and still pull around 18 MPG around town..
Thread
Thread Starter
Forum
Replies
Last Post