Have new rubber to reinstall my windshield for a 66 Fury III hard top. The bottom portion is different than any I have installed. Anybody point me in the right direction as to how I seal the bottom part. Nasty wet weather coming and need it back in. Thanks

 

What vehicle are you working on?🤪

 

As stated in topic a 1966 Fury Hardtop.

 

I’ve never worked on one specifically but if it’s a rubber gasket, it needs a pinch weld to hold on to. I usually start at the bottom and rope it in.

 

I've done quite a few rubber gasket windows but the bottom of these lays flat on the cowl.

 

If that’s the case then I would use a bead of urethane on the cowl and pull the rest in. I can’t say in fifty years of working on this old junk I’ve ever run across this but something needs to hold the glass down. Does it have a large molding across the lower edge?
pictures would help.

 

It does have a large flat lip on bottom. I have put sealer on it and hosed it down and appears to be dry.