bugy

I got a charger 1970, i was wondering about a SRT-8 engine going into this car, but i don't know if i'd have ignition and computing issues, what do you say?

78D200

Whatever you pull the motor out of, pull the wiring and computers with it as it will make the swap much easier.

bugy

don't you know if there's a aftermarket brand where i can get, all the stuff im gonna need for this setup like ecu, harness ecu, brakes, suspention, etc.
all advices are well received, thanks

Crazy4Carz.Com

the entire build is right here:

http://www.crazy4carz.net/carzboard/...t&referrerid=1

78D200

That is right. Steve did this in his Dart. Everything that you would need I'm sure that he will be able to help you with or point you in the right direction.

bugy

i dont know if you are steve, but if you are, that was an amazing job, im glad i could appreaciate such a motivating project, well sir of course it helped me out a lot (suspension, brakes, rear and front end),but i still need ecu to make this SRT8 engine work i'll use it with fuel injected so this is gonna be swapped into another car (charger 70), so i suppost original ecu from srt8 won't work with this setup because of alarm, brakes, and all issues it works with, i've seached for it, but can't find it yet, any aftermaket?

MrOldart2U

No he isn't Steve, Crazy4Cars is, the one that did the build. And not knowing how alarm/brakes, and other misc circuits/systems the ecu has, i have heard that those circuits are not needed to make one go. But to answer your question, yes aftermarket ecu's are out there and available. This is one that comes to mind...FAST

scotts74birds

Getting to be a pretty common swap. The Cheby guys have been doing this for years. Finally getting more info out there for the Mopar crowd.

bugy

guys, i already got the ecu i was looking for it is from MSD i just need the harness for factory fuel injection MSD do not sell it, any idea? FAST doesn't, they told me to look for it in Chrysler or get it in a salvage yard, any idea? this timing controller is PN 6013