way of life
#3
Mopar Lover
Thread Starter
i sure wish i had thought of that. my dad and i went to Tulsa NHRA world points finals 1965,66,67,68. all so my dad took me the first NHRA nationals 1955 in great bend KS. and 1956. saw lots of cool stuff.
#4
Mopar Lover
Hummmm..... I surprised you didn't get a job working on NASCAR for Richard Petty or working for Soppe the mopar guys.... Dam you could have even worked on those dry county "Moon" runner cars?
#5
#6
Mopar Fanatic
My parents took me to the first race of the 65' season at Williams Grove Speedway when I was 6 months old
As I got older I realized that life begins at 100!
At 100 MPH that is!!!
As I got older I realized that life begins at 100!
At 100 MPH that is!!!
Last edited by DodgeAddict; 08-09-2013 at 05:18 PM.
#11
Mopar Lover
If I had a nickle... I wouldnt be in the poor house or a redneck...LOL I love drag racing & street racing.. When I drag race I play hard and the harder you play the more it costs.. Moe,or Bob, maybe you know for every second of better time it costs how much money??? At one time it was like $1000 but its got to be alot more than that now...Bill
#12
Mopar Lover
I more than likely should not bring this up... BUT.....
Back in the early 2000's My brother-in-law talked me in to cutting up a 1984 Ford Ranger pick up.... We druged out one or our 350 chevy Roller motors.. Put some 13.0.1 KB pistons in it. topped off the short block with a set of then (Pro Top Line) aluminum cylinder heads, Put a eddy strip domminator manifold on top of it with a Vacuum 750 Holley.... Mallory CD Box... Ols small cap dist. with Mopar electronic guts in the distributor.... went to the bone yard and got a set of 4.11 out of a bronco2 , and put those in the 7.5 housing (And everyone said it would blow up). put a cage in it... Took it to Irwindale and went 11.40-11.00..
Most of the junk we had here from over the years... But what a way to clean out the garage.... Raced it for 5 years and sold it.... I dont know how many we pissed off... But we kicked alot of but with that little rag muffin.....LOL
Back in the early 2000's My brother-in-law talked me in to cutting up a 1984 Ford Ranger pick up.... We druged out one or our 350 chevy Roller motors.. Put some 13.0.1 KB pistons in it. topped off the short block with a set of then (Pro Top Line) aluminum cylinder heads, Put a eddy strip domminator manifold on top of it with a Vacuum 750 Holley.... Mallory CD Box... Ols small cap dist. with Mopar electronic guts in the distributor.... went to the bone yard and got a set of 4.11 out of a bronco2 , and put those in the 7.5 housing (And everyone said it would blow up). put a cage in it... Took it to Irwindale and went 11.40-11.00..
Most of the junk we had here from over the years... But what a way to clean out the garage.... Raced it for 5 years and sold it.... I dont know how many we pissed off... But we kicked alot of but with that little rag muffin.....LOL
Last edited by RacerHog; 08-09-2013 at 04:30 PM.
The following users liked this post:
RacerHog (08-09-2013)
#15
Mopar Lover
Thats the problem I am having now. Every time I take my Duster out for a cruise and I go up through Main st. I end up giving it a romp the tires break loose and you just cant get out of it to soon or it spoils the whole effect. Then I get thinking man what the hell are you doing your 56 not 18 untill the next urge gets the best of me.It's only a matter of time before I will be explaining myself to the judge and I will be hoping he to is a motor head and understands the need for speed and horsepower...Why do Dads have to be so smart.. Now that I are one I understand as my kids being dads also do. I guess we all understand we just want the best for our kids. And we dont want them to make the same mistakes we did.. My Dad wasn't around so I never learned, its my story and I'm sticking to it.LOL...Bill
Last edited by pro-tech; 08-09-2013 at 05:22 PM.
The following users liked this post:
RacerHog (08-09-2013)
#16
Mopar Lover
You all talking about being old..... You are only as old as you act.... But I do have to admit some days I do "feel old" !!! But it's not very often!!!
The following users liked this post:
RacerHog (08-09-2013)
#17
Mopar Lover
If I had a nickle... I wouldnt be in the poor house or a redneck...LOL I love drag racing & street racing.. When I drag race I play hard and the harder you play the more it costs.. Moe,or Bob, maybe you know for every second of better time it costs how much money??? At one time it was like $1000 but its got to be alot more than that now...Bill
$70,000 - 100,000 Will get you in the 9's - 8's
$105,000 - 160,000 Gets you... 8's-7's
$165,000 - 280,000 Get you ....7's - 6's
70,000 -85,000 motor
150,000 Chassis
The rest in all the other
Last edited by RacerHog; 08-09-2013 at 06:51 PM.
#18
Mopar Fanatic
Back in the early 90's we built a 505 B1 that cost over $40k to go in a tube car with a 4 link that cost $35K to build no telling how much spent getting used to the car & getting a decent # out of it (mid 8's 1/4 mile)
When my kids are all moved out
The motor gets a full rebuild with lower compression (Jesel belt broke @ 250+ runs)10 to 1 instead 14 to 1 & a fogger system
It's gonna go in this certified low mileage grandpa owned 85' D150
When my kids are all moved out
The motor gets a full rebuild with lower compression (Jesel belt broke @ 250+ runs)10 to 1 instead 14 to 1 & a fogger system
It's gonna go in this certified low mileage grandpa owned 85' D150
#23
I more than likely should not bring this up... BUT.....
Back in the early 2000's My brother-in-law talked me in to cutting up a 1984 Ford Ranger pick up.... We druged out one or our 350 chevy Roller motors.. Put some 13.0.1 KB pistons in it. topped off the short block with a set of then (Pro Top Line) aluminum cylinder heads, Put a eddy strip domminator manifold on top of it with a Vacuum 750 Holley.... Mallory CD Box... Ols small cap dist. with Mopar electronic guts in the distributor.... went to the bone yard and got a set of 4.11 out of a bronco2 , and put those in the 7.5 housing (And everyone said it would blow up). put a cage in it... Took it to Irwindale and went 11.40-11.00..
Most of the junk we had here from over the years... But what a way to clean out the garage.... Raced it for 5 years and sold it.... I dont know how many we pissed off... But we kicked alot of but with that little rag muffin.....LOL
Back in the early 2000's My brother-in-law talked me in to cutting up a 1984 Ford Ranger pick up.... We druged out one or our 350 chevy Roller motors.. Put some 13.0.1 KB pistons in it. topped off the short block with a set of then (Pro Top Line) aluminum cylinder heads, Put a eddy strip domminator manifold on top of it with a Vacuum 750 Holley.... Mallory CD Box... Ols small cap dist. with Mopar electronic guts in the distributor.... went to the bone yard and got a set of 4.11 out of a bronco2 , and put those in the 7.5 housing (And everyone said it would blow up). put a cage in it... Took it to Irwindale and went 11.40-11.00..
Most of the junk we had here from over the years... But what a way to clean out the garage.... Raced it for 5 years and sold it.... I dont know how many we pissed off... But we kicked alot of but with that little rag muffin.....LOL
Last edited by TVLynn; 08-10-2013 at 12:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
mystarcollectorcar.com
Off Topic
0
05-02-2010 01:29 PM
apocalypsesrt@hotmail.com
Do-It-yourself Section
2
11-10-2007 05:44 PM